Regardless whether it’s for your specific safety, for roadworthiness tests or to avoid a fine, being certain your headlamp bulbs are always working is very important. Indeed, bulbs are wearing auto parts that will obviously burn out after awhile and as a consequence need to be changed. You’re most certainly on this website because one of your parking lights is burnt out and you’re wanting to know how to change your Audi A6’s license plate bulb, we’ve written this content to help you do it by yourself and not have to go to your auto mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Audi A6.

change-license-plate-bulb-audi-a6

How to change the license plate bulb on your Audi A6 coming from the outside

This process is the simplest of the two, actually, for this one you will simply have to take off the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will spend some time on in the second section of this article content to describe the approach.
So let’s start with swapping the number plate bulb by going through the outside of your Audi A6. Regardless whether it’s the front or the back of your vehicle the operation will be similar.
Here are a few simple actions to follow to perform this service:

  • With the engine turned off, disconnect the battery terminals from your car
  • Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch assigned for this intent (commonly on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Audi A6
  • .

  • Use your screwdriver or knife to eject the bulb from its place, in the event you are afraid of destroying a thing, you can as well do it with your fingers.
  • Finally, put the new license plate light bulb
  • Last step, before reassembling, reconnect your battery and test the light to validate the success of the process.

How to change the number plate bulb on your Audi A6 without outside access

Second section of our item, change this license plate bulb on your Audi A6 without external access. Most often you will be able to access it, however some series (often at the rear does not allow this access).

How to change the front license plate bulb on my Audi A6

To change the one on the front plate, nothing could be less difficult, you will have to put yourself under the vehicle (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, commonly kept by two soft plastic tabs by pressing on both at the same time, then now that you have your license plate bulb block in hand, Take out the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to put in too much force or you will break the plastic cover), and you will simply have to take off the burnt-out license plate bulb and change it with the new , then test and reassemble the whole thing.

How to change the rear license plate bulb on my Audi A6

Finally last solution, you must change the bulb on the backplate of your Audi A6, but you are not able to open the cover from the outside of your vehicle. In this case, here is the method to do this task:

  • Unplug the battery from your Audi A6
  • Find the position of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
  • Once established, before removing the bulb holders, disconnect the holders for easier access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Change the burnt-out license plate bulb on your Audi A6, test it and reassemble it, watching the clips on the trunk liner

.
There you have it, you have found out the main ways for swapping license plate bulbs on your car, take note that on some models the technique may be a bit different but you should be able to accomplish it following the explanation of this content. If you can’t do it, don’t hesitate to go to your mechanic it would be a shame to break a part of your Audi A6. If you need to change other bulbs like the position light bulbs on your Audi A6 or the low beam bulbs on Audi A6, don’t hesitate to consult our content articles which explain you the process to follow.

To get more tips on the Audi A6, take a look at the Audi A6 category.