It doesn’t matter if it’s for your own security, for roadworthiness tests or to avoid a fine, making sure your headlamp bulbs are always working is necessary. In fact, bulbs are wearing parts that will predictably burn out over the years and consequently need to be replaced. You’re perhaps here because one of your parking lights is burnt out and you’re wanting to know how to change your Volvo S90’s license plate bulb, we’ve written and published this article content to help you do it by yourself and not have to go to your auto mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Volvo S90.

change-license-plate-bulb-volvo-s90

How to change the license plate bulb on your Volvo S90 throughout the outside

This tactic is the most simple of the two, in reality, for this one you will just require to remove the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will take a moment on in the second part of this content page to show you the approach.
So let’s begin with replacing the number plate bulb by going through the outside of your Volvo S90. It doesn’t matter if it’s the front or the back of your vehicle the process will be identical.
Here are a few simple steps to follow to perform this maintenance:

  • With the engine off, unplug the battery terminals from your car
  • Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch provided for this goal (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Volvo S90
  • .

  • Use your screwdriver or knife to remove the bulb from its location, in the event that you are worried of breaking a thing, you can as well do it with your fingers.
  • Finally, put the new license plate light bulb
  • Last stage, before reassembling, reconnect your battery and verify the light to validate the successfulness of the task.

How to change the number plate bulb on your Volvo S90 without outside access

Second part of our article, replace this license plate bulb on your Volvo S90 without external access. Generally you will be able to access it, but some series (often at the rear does not allow this access).

How to change the front license plate bulb on my Volvo S90

To change the one on the front plate, nothing could be less complicated, you will have to put yourself under the vehicle (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always kept by two soft plastic tabs by pressing on both at the same time, then now that you have your license plate bulb block in hand, Take out the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to put in too much force otherwise you will break the plastic cover), and you will only have to remove the burnt-out license plate bulb and swap it with the new , then check and reassemble the whole thing.

How to change the rear license plate bulb on my Volvo S90

Finally last option, you must change the bulb on the backplate of your Volvo S90, but you simply cannot open the cover from the outside of your vehicle. In such a case, here is the tactic to execute this task:

  • Disconnect the battery from your Volvo S90
  • Locate the spot of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever softly on all the frame of the trunk to remove it.
  • Once established, before removing the bulb holders, unplug the holders for less difficult access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Change the burnt-out license plate bulb on your Volvo S90, verify it and reassemble it, paying attention to the clips on the trunk liner

.
There you have it, you have discovered the main techniques for replacing license plate bulbs on your car, bear in mind that on some models the technique may be a bit different but you should be able to realize it following the explanation of this content. If you can’t do it, don’t hesitate to go to your mechanic it would be a shame to break a part of your Volvo S90. If you wish to change other bulbs like the position light bulbs on your Volvo S90 or the low beam bulbs on Volvo S90, don’t hesitate to consult our content articles which describe you the procedure to follow.

To discover more tips on the Volvo S90, take a look at the Volvo S90 category.