Regardless it’s for your own security, for roadworthiness testing or to avoid a fine, making sure your headlamp bulbs are constantly functioning is necessary. In reality, bulbs are wearing units that will predictably burn out over the years and consequently need to be changed. You’re most certainly on the website because one of your parking lights is burnt out and you’re worried about how to change your Ford Fiesta’s license plate bulb, we’ve written this content to help you do it on your own and not have to go to your motor mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Ford Fiesta.
How to change the license plate bulb on your Ford Fiesta throughout the outside
This tactic is the quickest of the two, actually, for this one you will simply require to take off the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate some time on in the second part of this document to teach you the method.
So let’s begin with replacing the number plate bulb by going through the outside of your Ford Fiesta. Regardless it’s the front or the back of your car the procedure will be similar.
Here are a few simple actions to follow to carry out this maintenance tasks:
- With the engine turned off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch supplied for this goal (commonly on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Ford Fiesta
- Use your screwdriver or knife to eject the bulb from its location, in the event that you are afraid of breaking something, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to confirm the success of the task.
.
How to replace the number plate bulb on your Ford Fiesta without outside access
Second part of our content, change this license plate bulb on your Ford Fiesta without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Ford Fiesta
To change the one on the front plate, nothing could be simpler, you will have to put yourself under the car (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, commonly held by two soft plastic tabs by pressing on both simultaneously, then right after you have your license plate bulb block in hand, Remove the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to apply too much force or you will break the plastic cover), and you will just have to take off the burnt-out license plate bulb and change it with the new , then test out and reassemble the whole thing.
How to change the rear license plate bulb on my Ford Fiesta
Finally last solution, you must change the bulb on the backplate of your Ford Fiesta, but you are not able to open the cover from the outside of your car. In such a case, here is the solution to perform this task:
- Unplug the battery from your Ford Fiesta
- Find the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, unplug the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Ford Fiesta, verify it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have learned the main techniques for replacing license plate bulbs on your car, be aware that on some models the method may be a bit different but you should be able to do it following the outline of this article content. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your Ford Fiesta. If you desire to change other bulbs like the position light bulbs on your Ford Fiesta or the low beam bulbs on Ford Fiesta, don’t be reluctant to consult our articles which demonstrate you the operation to follow.
To find more tips on the Ford Fiesta, take a look at the Ford Fiesta category.
