Whether it’s for your own safety, for roadworthiness tests or to avoid a fine, ensuring that your headlamp bulbs are always operational is really important. Indeed, bulbs are wearing parts that will inevitably burn out over the years and therefore need to be swapped out. You’re probably on this website because one of your parking lights is burnt out and you’re struggling with how to change your Volkswagen Touran 3’s license plate bulb, we’ve made this document to help you do it all on your own and not have to go to your auto mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Volkswagen Touran 3.

change-license-plate-bulb-volkswagen-touran-3

How to replace the license plate bulb on your Volkswagen Touran 3 throughout the outside

This tactic is the quickest of the two, in reality, for this one you will just have to take off the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will dedicate some time on in the second section of this article content to demonstrate the way.
So let’s start with swapping the number plate bulb by going through the outside of your Volkswagen Touran 3. Whether it’s the front or the back of your vehicle the technique will be identical.
Here are a few simple guidelines to stick to to execute this maintenance:

  • With the engine off, disconnect the battery terminals from your car
  • Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch supplied for this goal (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Volkswagen Touran 3
  • .

  • Use your screwdriver or knife to eject the bulb from its location, in the event that you are worried of breaking a thing, you can also do it with your fingers.
  • Finally, put the new license plate light bulb
  • Last step, before reassembling, reconnect your battery and verify the light to validate the successfulness of the process.

How to replace the number plate bulb on your Volkswagen Touran 3 without outside access

Second section of our content page, swap this license plate bulb on your Volkswagen Touran 3 without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).

How to replace the front license plate bulb on my Volkswagen Touran 3

To replace the one on the front plate, nothing could be less hard, you will have to put yourself under the vehicle (ideally placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally kept by two soft plastic tabs by pressing on both at once, then right after you have your license plate bulb block in hand, Take off the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to apply too much force or you will break the plastic cover), and you will only have to take off the burnt-out license plate bulb and change it with the new , then verify and reassemble the whole thing.

How to replace the rear license plate bulb on my Volkswagen Touran 3

Finally last possibility, you must replace the bulb on the backplate of your Volkswagen Touran 3, but you simply cannot open the cover from the outside of your vehicle. In this case, here is the method to operate this operation:

  • Disconnect the battery from your Volkswagen Touran 3
  • Find the position of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever delicately on all the frame of the trunk to remove it.
  • Once found, before removing the bulb holders, disconnect the holders for less difficult access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Replace the burnt-out license plate bulb on your Volkswagen Touran 3, verify it and reassemble it, watching the clips on the trunk liner

.
There you have it, you have learned the main approaches for swapping license plate bulbs on your car, remember that on some models the method may be a bit different but you should be able to realize it following the explanation of this content page. If you can’t do it, don’t hesitate to go to your mechanic it would be a shame to break a part of your Volkswagen Touran 3. If you desire to change other bulbs like the position light bulbs on your Volkswagen Touran 3 or the low beam bulbs on Volkswagen Touran 3, don’t hesitate to browse our content articles which demonstrate you the process to follow.

If you want more guides on the Volkswagen Touran 3, go to our Volkswagen Touran 3 category.