Whether it’s for your own personal security, for roadworthiness testing or to avoid a fine, being certain your headlamp bulbs are always operational is fundamental. Indeed, bulbs are wearing parts that will inevitably burn out as time passes and therefore need to be replaced. You’re likely here because one of your parking lights is burnt out and you’re questioning how to change your Volkswagen Transporter 6’s license plate bulb, we’ve written this content to help you do it without any help and not have to go to your auto technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Volkswagen Transporter 6.


How to change the license plate bulb on your Volkswagen Transporter 6 coming from the outside

This process is the fastest of the two, in reality, for this one you will just need to take out the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will spend a moment on in the second section of this article to describe the method.
So let’s start with replacing the number plate bulb by going through the outside of your Volkswagen Transporter 6. Whether it’s the front or the back of your automobile the procedure will be the same.
Here are a few simple guidelines to stick to to execute this maintenance:

  • With the engine off, disconnect the battery terminals from your car
  • Face your license plate and use a flat screwdriver or knife to place the flat part into the notch specified for this intent (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Volkswagen Transporter 6
  • .

  • Use your screwdriver or knife to eject the bulb from its spot, in the event you are afraid of destroying anything, you can also do it with your fingers.
  • Finally, put the new license plate light bulb
  • Last stage, before reassembling, reconnect your battery and verify the light to validate the achievement of the task.

How to change the number plate bulb on your Volkswagen Transporter 6 without outside access

Second section of our article, swap this license plate bulb on your Volkswagen Transporter 6 without external access. Generally you will be able to access it, however some series (often at the rear does not allow this access).

How to change the front license plate bulb on my Volkswagen Transporter 6

To change the one on the front plate, nothing could be much easier, you will have to put yourself under the automobile (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always kept by two soft plastic tabs by pressing on both at the same time, then now that you have your license plate bulb block in hand, Take away the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to exert too much force otherwise you will break the plastic cover), and you will just have to take out the burnt-out license plate bulb and replace it with the new , then test and reassemble the whole thing.

How to change the rear license plate bulb on my Volkswagen Transporter 6

Finally last option, you must change the bulb on the backplate of your Volkswagen Transporter 6, but you cannot open the cover from the outside of your automobile. In this case, here is the technique to carry out this operation:

  • Unplug the battery from your Volkswagen Transporter 6
  • Locate the location of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
  • Once located, before removing the bulb holders, disconnect the holders for less difficult access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Replace the burnt-out license plate bulb on your Volkswagen Transporter 6, verify it and reassemble it, watching the clips on the trunk liner

There you have it, you have found out the main methods for replacing license plate bulbs on your car, be aware that on some models the technique may be a bit different but you should be able to accomplish it following the explanation of this document. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your Volkswagen Transporter 6. If you need to change other bulbs like the position light bulbs on your Volkswagen Transporter 6 or the low beam bulbs on Volkswagen Transporter 6, don’t be reluctant to browse our articles which explain you the process to follow.

If you have any additional questions about the Volkswagen Transporter 6, do not hesitate to consult our Volkswagen Transporter 6 category.