It doesn’t matter if it’s for your own personal security, for roadworthiness testing or to avoid a fine, making sure your headlamp bulbs are always effective is very important. In reality, bulbs are wearing parts that will inevitably burn out after awhile and consequently need to be swapped out. You’re most likely on this website because one of your parking lights is burnt out and you’re struggling with how to change your Volkswagen Routan’s license plate bulb, we’ve written this content to help you do it without any help and not have to go to your mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Volkswagen Routan.

change-license-plate-bulb-volkswagen-routan

How to replace the license plate bulb on your Volkswagen Routan throughout the outside

This option is the least difficult of the two, actually, for this one you will only have to take away the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will spend some time on in the second part of this content to describe the way.
So let’s start with replacing the number plate bulb by going through the outside of your Volkswagen Routan. It doesn’t matter if it’s the front or the back of your vehicle the process will be identical.
Here are a few simple actions to follow to perform this maintenance:

  • With the engine off, disconnect the battery terminals from your car
  • Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch supplied for this intent (in general on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Volkswagen Routan
  • .

  • Use your screwdriver or knife to remove the bulb from its location, in the event that you are afraid of destroying something, you can as well do it with your fingers.
  • Finally, position the new license plate light bulb
  • Last step, before reassembling, reconnect your battery and verify the light to validate the successfulness of the operation.

How to change the number plate bulb on your Volkswagen Routan without outside access

Second part of our article, change this license plate bulb on your Volkswagen Routan without external access. Generally you will be able to access it, however some series (often at the rear does not allow this access).

How to replace the front license plate bulb on my Volkswagen Routan

To replace the one on the front plate, nothing could be simpler, you will have to position yourself under the vehicle (ideally placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in general kept by two soft plastic tabs by pressing on both at the same time, then once you have your license plate bulb block in hand, Take off the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to exert too much pressure otherwise you will break the plastic cover), and you will just have to take away the burnt-out license plate bulb and replace it with the new , then verify and reassemble the whole thing.

How to replace the rear license plate bulb on my Volkswagen Routan

Finally last solution, you must replace the bulb on the backplate of your Volkswagen Routan, but you cannot really open the cover from the outside of your vehicle. In this case, here is the solution to accomplish this task:

  • Unplug the battery from your Volkswagen Routan
  • Find the location of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever gently on all the frame of the trunk to remove it.
  • Once located, before removing the bulb holders, disconnect the holders for less difficult access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Replace the burnt-out license plate bulb on your Volkswagen Routan, verify it and reassemble it, watching the clips on the trunk liner

.
There you have it, you have discovered the main approaches for replacing license plate bulbs on your car, take note that on some models the technique may be a bit different but you should be able to accomplish it following the explanation of this content. If you can’t do it, don’t hesitate to go to your garage it would be a shame to break a part of your Volkswagen Routan. If you want to change other bulbs like the position light bulbs on your Volkswagen Routan or the low beam bulbs on Volkswagen Routan, don’t hesitate to consult our articles which explain you the operation to follow.

To find more tips on the Volkswagen Routan, take a look at the Volkswagen Routan category.