Regardless whether it’s for your own personal safety, for roadworthiness testing or to avoid a fine, being certain your headlamp bulbs are always functioning is very important. Indeed, bulbs are wearing auto parts that will inevitably burn out as time passes and consequently need to be changed. You’re probably on this website because one of your parking lights is burnt out and you’re wanting to know how to change your Volkswagen Lupo’s license plate bulb, we’ve created this article content to help you do it all on your own and not have to go to your auto mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Volkswagen Lupo.
How to replace the license plate bulb on your Volkswagen Lupo coming from the outside
This option is the least difficult of the two, actually, for this one you will just need to take off the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will take a moment on in the second part of this content to clarify the method.
So let’s begin with swapping the number plate bulb by going through the outside of your Volkswagen Lupo. Regardless whether it’s the front or the back of your motor vehicle the technique will be similar.
Here are a few simple steps to stick to to execute this maintenance:
- With the engine off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch provided for this intent (commonly on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Volkswagen Lupo
- Use your screwdriver or knife to eject the bulb from its spot, in the event that you are scared of destroying something, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and check the light to confirm the success of the procedure.
.
How to replace the number plate bulb on your Volkswagen Lupo without outside access
Second part of our article, swap this license plate bulb on your Volkswagen Lupo without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Volkswagen Lupo
To replace the one on the front plate, nothing could be much easier, you will have to put yourself under the motor vehicle (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, commonly held by two soft plastic tabs by pressing on both at once, then once you have your license plate bulb block in hand, Take off the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be careful not to exert too much pressure or you will break the plastic cover), and you will simply have to take off the burnt-out license plate bulb and swap it with the new , then verify and reassemble the whole thing.
How to replace the rear license plate bulb on my Volkswagen Lupo
Finally last solution, you must replace the bulb on the backplate of your Volkswagen Lupo, but you cannot open the cover from the outside of your motor vehicle. In this instance, here is the tactic to conduct this operation:
- Disconnect the battery from your Volkswagen Lupo
- Identify the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Volkswagen Lupo, check it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have discovered the main approaches for swapping license plate bulbs on your car, take note that on some models the method may be a bit different but you should be able to realize it following the outline of this document. If you can’t do it, don’t hesitate to go to your garage area it would be a shame to break a part of your Volkswagen Lupo. If you wish to change other bulbs like the position light bulbs on your Volkswagen Lupo or the low beam bulbs on Volkswagen Lupo, don’t hesitate to browse our articles which demonstrate you the procedure to follow.
To discover more tips on the Volkswagen Lupo, take a look at the Volkswagen Lupo category.
