Regardless whether it’s for your own safety, for roadworthiness tests or to avoid a fine, ensuring that your headlamp bulbs are all the time effective is extremely important. Indeed, bulbs are wearing units that will undoubtedly burn out as time passes and consequently need to be swapped out. You’re likely here because one of your parking lights is burnt out and you’re wondering how to change your Alfa Romeo Giulietta’s license plate bulb, we’ve made this content to help you do it by yourself and not have to go to your auto mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Alfa Romeo Giulietta.
How to swap the license plate bulb on your Alfa Romeo Giulietta throughout the outside
This option is the easiest of the two, actually, for this one you will simply need to take out the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will take a moment on in the second section of this content page to teach you the way.
So let’s begin with replacing the number plate bulb by going through the outside of your Alfa Romeo Giulietta. Regardless whether it’s the front or the back of your car the operation will be the same.
Here are a few simple steps to stick to to perform this maintenance:
- With the engine turned off, disconnect the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch supplied for this goal (in general on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Alfa Romeo Giulietta
- Use your screwdriver or knife to remove the bulb from its place, in the event you are afraid of breaking something, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and verify the light to confirm the successfulness of the operation.
.
How to change the number plate bulb on your Alfa Romeo Giulietta without outside access
Second section of our article, replace this license plate bulb on your Alfa Romeo Giulietta without external access. In most cases you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Alfa Romeo Giulietta
To swap the one on the front plate, nothing could be less difficult, you will have to position yourself under the car (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in general kept by two soft plastic tabs by pressing on both simultaneously, then once you have your license plate bulb block in hand, Take off the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to apply too much force otherwise you will break the plastic cover), and you will simply have to take out the burnt-out license plate bulb and swap it with the new , then test and reassemble the whole thing.
How to swap the rear license plate bulb on my Alfa Romeo Giulietta
Finally last solution, you must swap the bulb on the backplate of your Alfa Romeo Giulietta, but you are not able to open the cover from the outside of your car. In this case, here is the method to conduct this operation:
- Unplug the battery from your Alfa Romeo Giulietta
- Identify the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, disconnect the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Alfa Romeo Giulietta, verify it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have learned the main solutions for replacing license plate bulbs on your car, bear in mind that on some models the technique may be a bit different but you should be able to do it following the explanation of this content page. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your Alfa Romeo Giulietta. If you want to change other bulbs like the position light bulbs on your Alfa Romeo Giulietta or the low beam bulbs on Alfa Romeo Giulietta, don’t be reluctant to read our content articles which demonstrate you the operation to follow.
To discover more tips on the Alfa Romeo Giulietta, take a look at the Alfa Romeo Giulietta category.
