Regardless it’s for your own personal safety, for roadworthiness tests or to avoid a fine, ensuring your headlamp bulbs are always functional is very important. In fact, bulbs are wearing auto parts that will inevitably burn out in the future and as a result need to be replaced. You’re almost certainly on this site because one of your parking lights is burnt out and you’re worried about how to change your Volkswagen Golf 7’s license plate bulb, we’ve created this document to help you do it on your own and not have to go to your mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Volkswagen Golf 7.
How to replace the license plate bulb on your Volkswagen Golf 7 through the outside
This tactic is the most simple of the two, in reality, for this one you will only have to remove the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate some time on in the second part of this article to teach you the approach.
So let’s start with replacing the number plate bulb by going through the outside of your Volkswagen Golf 7. Regardless it’s the front or the back of your car the operation will be similar.
Here are a few simple actions to stick to to execute this service:
- With the engine off, disconnect the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch supplied for this goal (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Volkswagen Golf 7
- Use your screwdriver or knife to remove the bulb from its place, in the event you are worried of destroying something, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to confirm the achievement of the task.
.
How to replace the number plate bulb on your Volkswagen Golf 7 without outside access
Second part of our document, change this license plate bulb on your Volkswagen Golf 7 without external access. Generally you will be able to access it, however some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Volkswagen Golf 7
To replace the one on the front plate, nothing could be less hard, you will have to put yourself under the car (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally held by two soft plastic tabs by pressing on both at the same time, then right after you have your license plate bulb block in hand, Take away the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to apply too much pressure otherwise you will break the plastic cover), and you will simply have to remove the burnt-out license plate bulb and swap it with the new , then test out and reassemble the whole thing.
How to replace the rear license plate bulb on my Volkswagen Golf 7
Finally last solution, you must replace the bulb on the backplate of your Volkswagen Golf 7, but you cannot open the cover from the outside of your car. In such a case, here is the tactic to execute this operation:
- Disconnect the battery from your Volkswagen Golf 7
- Identify the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, disconnect the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Volkswagen Golf 7, test it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have learned the main tactics for replacing license plate bulbs on your car, remember that on some models the methodology may be a bit different but you should be able to accomplish it following the outline of this content page. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your Volkswagen Golf 7. If you need to change other bulbs like the position light bulbs on your Volkswagen Golf 7 or the low beam bulbs on Volkswagen Golf 7, don’t be reluctant to read our articles which demonstrate you the operation to follow.
Whenever you have any additional questions about the Volkswagen Golf 7, do not hesitate to consult our Volkswagen Golf 7 category.
