It doesn’t matter if it’s for your specific security, for roadworthiness tests or to avoid a fine, ensuring that your headlamp bulbs are constantly effective is extremely important. Indeed, bulbs are wearing auto parts that will undoubtedly burn out after some time and consequently need to be swapped out. You’re likely here because one of your parking lights is burnt out and you’re worried about how to change your Volkswagen Caddy 3’s license plate bulb, we’ve written and published this article content to help you do it by yourself and not have to go to your technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Volkswagen Caddy 3.
How to replace the license plate bulb on your Volkswagen Caddy 3 through the outside
This technique is the simplest of the two, in truth, for this one you will just require to take off the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate some time on in the second part of this content page to describe the method.
So let’s start with replacing the number plate bulb by going through the outside of your Volkswagen Caddy 3. It doesn’t matter if it’s the front or the back of your motor vehicle the procedure will be identical.
Here are a few simple guidelines to stick to to perform this maintenance:
- With the engine off, disconnect the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch specified for this goal (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Volkswagen Caddy 3
- Use your screwdriver or knife to remove the bulb from its placement, in the event you are scared of damaging something, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to validate the success of the process.
.
How to replace the number plate bulb on your Volkswagen Caddy 3 without outside access
Second part of our content page, replace this license plate bulb on your Volkswagen Caddy 3 without external access. Most often you will be able to access it, but some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Volkswagen Caddy 3
To replace the one on the front plate, nothing could be less difficult, you will have to position yourself under the motor vehicle (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally kept by two soft plastic tabs by pressing on both at once, then right after you have your license plate bulb block in hand, Take off the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to put in too much pressure or you will break the plastic cover), and you will just have to take off the burnt-out license plate bulb and change it with the new , then test out and reassemble the whole thing.
How to replace the rear license plate bulb on my Volkswagen Caddy 3
Finally last option, you must replace the bulb on the backplate of your Volkswagen Caddy 3, but you simply cannot open the cover from the outside of your motor vehicle. In this case, here is the tactic to conduct this task:
- Unplug the battery from your Volkswagen Caddy 3
- Locate the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, disconnect the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Volkswagen Caddy 3, verify it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have found out the main approaches for replacing license plate bulbs on your car, take note that on some models the method may be a bit different but you should be able to do it following the explanation of this content. If you can’t do it, don’t hesitate to go to your garage it would be a shame to break a part of your Volkswagen Caddy 3. If you want to change other bulbs like the position light bulbs on your Volkswagen Caddy 3 or the low beam bulbs on Volkswagen Caddy 3, don’t hesitate to browse our content articles which describe you the procedure to follow.
To find more tips on the Volkswagen Caddy 3, take a look at the Volkswagen Caddy 3 category.
