Regardless it’s for your own personal security, for roadworthiness testing or to avoid a fine, being sure your headlamp bulbs are always functioning is very important. In fact, bulbs are wearing parts that will surely burn out over time and therefore need to be changed. You’re almost certainly on this website because one of your parking lights is burnt out and you’re wanting to know how to change your Toyota Yaris’s license plate bulb, we’ve created this document to help you do it all on your own and not have to go to your technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Toyota Yaris.
How to change the license plate bulb on your Toyota Yaris through the outside
This technique is the least difficult of the two, in reality, for this one you will only require to take out the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will spend a moment on in the second section of this article content to explain the approach.
So let’s start with replacing the number plate bulb by going through the outside of your Toyota Yaris. Regardless it’s the front or the back of your automobile the process will be the same.
Here are a few simple guidelines to follow to perform this service:
- With the engine turned off, disconnect the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch supplied for this intent (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Toyota Yaris
- Use your screwdriver or knife to remove the bulb from its location, in the event that you are scared of damaging something, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to validate the successfulness of the process.
.
How to replace the number plate bulb on your Toyota Yaris without outside access
Second section of our content, swap this license plate bulb on your Toyota Yaris without external access. Most often you will be able to access it, but some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Toyota Yaris
To change the one on the front plate, nothing could be less complicated, you will have to put yourself under the automobile (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually kept by two soft plastic tabs by pressing on both at once, then now that you have your license plate bulb block in hand, Take off the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be careful not to put in too much force or you will break the plastic cover), and you will simply have to take out the burnt-out license plate bulb and swap it with the new , then test and reassemble the whole thing.
How to change the rear license plate bulb on my Toyota Yaris
Finally last possibility, you must change the bulb on the backplate of your Toyota Yaris, but you cannot really open the cover from the outside of your automobile. In this instance, here is the tactic to execute this task:
- Disconnect the battery from your Toyota Yaris
- Identify the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, disconnect the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Toyota Yaris, verify it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have discovered the main methods for replacing license plate bulbs on your car, take notice that on some models the method may be a bit different but you should be able to do it following the outline of this content page. If you can’t do it, don’t be reluctant to go to your garage it would be a shame to break a part of your Toyota Yaris. If you want to change other bulbs like the position light bulbs on your Toyota Yaris or the low beam bulbs on Toyota Yaris, don’t be reluctant to browse our content articles which explain you the process to follow.
To get more tips on the Toyota Yaris, take a look at the Toyota Yaris category.
