It doesn’t matter if it’s for your personal safety, for roadworthiness tests or to avoid a fine, ensuring that your headlamp bulbs are all the time functioning is necessary. In fact, bulbs are wearing auto parts that will obviously burn out after a while and consequently need to be changed. You’re perhaps on this website because one of your parking lights is burnt out and you’re wanting to know how to change your Toyota Hilux 4’s license plate bulb, we’ve made this document to help you do it by yourself and not have to go to your mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Toyota Hilux 4.
How to replace the license plate bulb on your Toyota Hilux 4 throughout the outside
This approach is the fastest of the two, in truth, for this one you will simply require to remove the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will spend a moment on in the second part of this content to demonstrate the method.
So let’s begin with swapping the number plate bulb by going through the outside of your Toyota Hilux 4. It doesn’t matter if it’s the front or the back of your vehicle the process will be identical.
Here are a few simple guidelines to follow to conduct this routine service:
- With the engine off, disconnect the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch provided for this purpose (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Toyota Hilux 4
- Use your screwdriver or knife to eject the bulb from its location, in the event that you are afraid of breaking anything, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to validate the successfulness of the task.
.
How to replace the number plate bulb on your Toyota Hilux 4 without outside access
Second part of our document, swap this license plate bulb on your Toyota Hilux 4 without external access. Generally you will be able to access it, but some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Toyota Hilux 4
To replace the one on the front plate, nothing could be much easier, you will have to put yourself under the vehicle (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always kept by two soft plastic tabs by pressing on both simultaneously, then right after you have your license plate bulb block in hand, Take out the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be careful not to exert too much pressure otherwise you will break the plastic cover), and you will simply have to remove the burnt-out license plate bulb and change it with the new , then verify and reassemble the whole thing.
How to replace the rear license plate bulb on my Toyota Hilux 4
Finally last solution, you must replace the bulb on the backplate of your Toyota Hilux 4, but you simply cannot open the cover from the outside of your vehicle. In such a case, here is the tactic to perform this task:
- Disconnect the battery from your Toyota Hilux 4
- Find the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, disconnect the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Toyota Hilux 4, verify it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have learned the main approaches for swapping license plate bulbs on your car, remember that on some models the technique may be a bit different but you should be able to realize it following the explanation of this content. If you can’t do it, don’t hesitate to go to your mechanic it would be a shame to break a part of your Toyota Hilux 4. If you wish to change other bulbs like the position light bulbs on your Toyota Hilux 4 or the low beam bulbs on Toyota Hilux 4, don’t hesitate to consult our content articles which demonstrate you the procedure to follow.
If you want more guides on the Toyota Hilux 4, go to our Toyota Hilux 4 category.
