Whether it’s for your own personal security, for roadworthiness testing or to avoid a fine, being certain your headlamp bulbs are always working is extremely important. In fact, bulbs are wearing auto parts that will inevitably burn out as time passes and as a result need to be changed. You’re perhaps on this site because one of your parking lights is burnt out and you’re wanting to know how to change your Tesla Model Y’s license plate bulb, we’ve written and published this content page to help you do it without any help and not have to go to your auto technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Tesla Model Y.
How to replace the license plate bulb on your Tesla Model Y coming from the outside
This tactic is the simplest of the two, actually, for this one you will just require to take out the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will dedicate a moment on in the second section of this article content to describe the method.
So let’s begin with replacing the number plate bulb by going through the outside of your Tesla Model Y. Whether it’s the front or the back of your car the process will be the same.
Here are a few simple guidelines to stick to to conduct this maintenance:
- With the engine turned off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch specified for this purpose (commonly on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Tesla Model Y
- Use your screwdriver or knife to remove the bulb from its place, in the event that you are afraid of destroying something, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and test the light to validate the achievement of the procedure.
.
How to replace the number plate bulb on your Tesla Model Y without outside access
Second section of our document, replace this license plate bulb on your Tesla Model Y without external access. Most often you will be able to access it, however some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Tesla Model Y
To replace the one on the front plate, nothing could be less complicated, you will have to position yourself under the car (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, commonly held by two soft plastic tabs by pressing on both at once, then now that you have your license plate bulb block in hand, Take out the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to apply too much force otherwise you will break the plastic cover), and you will only have to take out the burnt-out license plate bulb and change it with the new , then verify and reassemble the whole thing.
How to replace the rear license plate bulb on my Tesla Model Y
Finally last possibility, you must replace the bulb on the backplate of your Tesla Model Y, but you simply cannot open the cover from the outside of your car. In this case, here is the technique to perform this operation:
- Disconnect the battery from your Tesla Model Y
- Find the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Tesla Model Y, test it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have learned the main solutions for replacing license plate bulbs on your car, be aware that on some models the methodology may be a bit different but you should be able to do it following the explanation of this content. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your Tesla Model Y. If you want to change other bulbs like the position light bulbs on your Tesla Model Y or the low beam bulbs on Tesla Model Y, don’t be reluctant to consult our articles which describe you the operation to follow.
To get more tips on the Tesla Model Y, take a look at the Tesla Model Y category.
