It doesn’t matter if it’s for your own safety, for roadworthiness testing or to avoid a fine, ensuring your headlamp bulbs are always functional is fundamental. In reality, bulbs are wearing parts that will inevitably burn out after a while and therefore need to be replaced. You’re most certainly on the website because one of your parking lights is burnt out and you’re wanting to know how to change your Renault Master’s license plate bulb, we’ve written this article content to help you do it by yourself and not have to go to your technician. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Renault Master.
How to replace the license plate bulb on your Renault Master throughout the outside
This technique is the simplest of the two, in truth, for this one you will simply require to take away the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will take some time on in the second part of this document to clarify the method.
So let’s start with changing the number plate bulb by going through the outside of your Renault Master. It doesn’t matter if it’s the front or the back of your motor vehicle the procedure will be similar.
Here are a few simple steps to stick to to carry out this maintenance tasks:
- With the engine off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch supplied for this intent (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Renault Master
- Use your screwdriver or knife to eject the bulb from its location, if you are afraid of destroying something, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to validate the successfulness of the process.
.
How to change the number plate bulb on your Renault Master without outside access
Second part of our content page, replace this license plate bulb on your Renault Master without external access. Most often you will be able to access it, however some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Renault Master
To replace the one on the front plate, nothing could be less complicated, you will have to position yourself under the motor vehicle (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually kept by two soft plastic tabs by pressing on both simultaneously, then now that you have your license plate bulb block in hand, Take away the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to put in too much pressure otherwise you will break the plastic cover), and you will only have to take away the burnt-out license plate bulb and swap it with the new , then test and reassemble the whole thing.
How to replace the rear license plate bulb on my Renault Master
Finally last option, you must replace the bulb on the backplate of your Renault Master, but you are not able to open the cover from the outside of your motor vehicle. In such a case, here is the process to accomplish this operation:
- Unplug the battery from your Renault Master
- Find the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, disconnect the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Renault Master, test it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have learned the main solutions for changing license plate bulbs on your car, take note that on some models the technique may be a bit different but you should be able to realize it following the explanation of this content. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your Renault Master. If you need to change other bulbs like the position light bulbs on your Renault Master or the low beam bulbs on Renault Master, don’t be reluctant to consult our content articles which explain you the operation to follow.
To get more tips on the Renault Master, take a look at the Renault Master category.
