Regardless it’s for your own personal safety, for roadworthiness testing or to avoid a fine, ensuring your headlamp bulbs are constantly functioning is fundamental. In reality, bulbs are wearing auto parts that will undoubtedly burn out after awhile and therefore need to be swapped out. You’re almost certainly on this website because one of your parking lights is burnt out and you’re worried about how to change your Renault Master 3’s license plate bulb, we’ve created this content page to help you do it all on your own and not have to go to your mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Renault Master 3.
How to change the license plate bulb on your Renault Master 3 throughout the outside
This tactic is the least difficult of the two, in reality, for this one you will only require to take out the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will spend a moment on in the second section of this content to describe the way.
So let’s start with replacing the number plate bulb by going through the outside of your Renault Master 3. Regardless it’s the front or the back of your motor vehicle the procedure will be identical.
Here are a few simple guidelines to stick to to carry out this routine service:
- With the engine off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch provided for this purpose (in general on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Renault Master 3
- Use your screwdriver or knife to remove the bulb from its placement, in the event you are worried of breaking a thing, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and verify the light to validate the success of the task.
.
How to replace the number plate bulb on your Renault Master 3 without outside access
Second section of our content page, change this license plate bulb on your Renault Master 3 without external access. Most often you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Renault Master 3
To change the one on the front plate, nothing could be simpler, you will have to put yourself under the motor vehicle (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in general kept by two soft plastic tabs by pressing on both simultaneously, then once you have your license plate bulb block in hand, Take away the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to apply too much pressure or you will break the plastic cover), and you will just have to take out the burnt-out license plate bulb and replace it with the new , then check and reassemble the whole thing.
How to change the rear license plate bulb on my Renault Master 3
Finally last possibility, you must change the bulb on the backplate of your Renault Master 3, but you are not able to open the cover from the outside of your motor vehicle. In such a case, here is the technique to operate this operation:
- Unplug the battery from your Renault Master 3
- Identify the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, disconnect the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Renault Master 3, verify it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have learned the main approaches for replacing license plate bulbs on your car, be aware that on some models the method may be a bit different but you should be able to accomplish it following the outline of this content. If you can’t do it, don’t hesitate to go to your workshop it would be a shame to break a part of your Renault Master 3. If you desire to change other bulbs like the position light bulbs on your Renault Master 3 or the low beam bulbs on Renault Master 3, don’t hesitate to consult our content articles which explain you the procedure to follow.
In the event that you have any further questions about the Renault Master 3, do not hesitate to consult our Renault Master 3 category.
