Whether it’s for your specific safety, for roadworthiness testing or to avoid a fine, being sure your headlamp bulbs are constantly functioning is fundamental. In fact, bulbs are wearing auto parts that will surely burn out with time and as a result need to be replaced. You’re almost certainly in this article because one of your parking lights is burnt out and you’re wondering how to change your Peugeot 307 Cc’s license plate bulb, we’ve written and published this article to help you do it by yourself and not have to go to your auto mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Peugeot 307 Cc.
How to replace the license plate bulb on your Peugeot 307 Cc coming from the outside
This approach is the least difficult of the two, in reality, for this one you will just have to take off the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will spend a moment on in the second part of this article content to clarify the method.
So let’s start with replacing the number plate bulb by going through the outside of your Peugeot 307 Cc. Whether it’s the front or the back of your motor vehicle the technique will be the same.
Here are a few simple steps to stick to to perform this routine service:
- With the engine off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch supplied for this purpose (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Peugeot 307 Cc
- Use your screwdriver or knife to eject the bulb from its placement, if you are scared of destroying something, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and check the light to confirm the successfulness of the procedure.
.
How to replace the number plate bulb on your Peugeot 307 Cc without outside access
Second part of our article, change this license plate bulb on your Peugeot 307 Cc without external access. In most cases you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Peugeot 307 Cc
To replace the one on the front plate, nothing could be much easier, you will have to position yourself under the motor vehicle (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally held by two soft plastic tabs by pressing on both at once, then now that you have your license plate bulb block in hand, Remove the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to apply too much pressure otherwise you will break the plastic cover), and you will only have to take off the burnt-out license plate bulb and swap it with the new , then check and reassemble the whole thing.
How to replace the rear license plate bulb on my Peugeot 307 Cc
Finally last solution, you must replace the bulb on the backplate of your Peugeot 307 Cc, but you cannot really open the cover from the outside of your motor vehicle. In such a case, here is the method to perform this task:
- Disconnect the battery from your Peugeot 307 Cc
- Identify the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, disconnect the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Peugeot 307 Cc, check it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have found out the main approaches for replacing license plate bulbs on your car, remember that on some models the methodology may be a bit different but you should be able to realize it following the explanation of this article content. If you can’t do it, don’t hesitate to go to your garage area it would be a shame to break a part of your Peugeot 307 Cc. If you need to change other bulbs like the position light bulbs on your Peugeot 307 Cc or the low beam bulbs on Peugeot 307 Cc, don’t hesitate to consult our content articles which explain you the process to follow.
To get more tips on the Peugeot 307 Cc, take a look at the Peugeot 307 Cc category.
