Regardless it’s for your own personal security, for roadworthiness testing or to avoid a fine, making sure your headlamp bulbs are in every case functional is very important. Indeed, bulbs are wearing auto parts that will surely burn out over time and therefore need to be swapped out. You’re likely on the website because one of your parking lights is burnt out and you’re struggling with how to change your Peugeot 205’s license plate bulb, we’ve created this content to help you do it by yourself and not have to go to your auto technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Peugeot 205.
How to replace the license plate bulb on your Peugeot 205 throughout the outside
This technique is the simplest of the two, in truth, for this one you will simply need to take off the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will dedicate some time on in the second part of this document to describe the method.
So let’s start with replacing the number plate bulb by going through the outside of your Peugeot 205. Regardless it’s the front or the back of your car the process will be identical.
Here are a few simple steps to stick to to execute this service:
- With the engine turned off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch provided for this goal (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Peugeot 205
- Use your screwdriver or knife to remove the bulb from its place, if you are scared of damaging a thing, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to confirm the achievement of the task.
.
How to replace the number plate bulb on your Peugeot 205 without outside access
Second part of our article, swap this license plate bulb on your Peugeot 205 without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Peugeot 205
To replace the one on the front plate, nothing could be simpler, you will have to put yourself under the car (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually kept by two soft plastic tabs by pressing on both simultaneously, then right after you have your license plate bulb block in hand, Take out the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be careful not to put in too much force or you will break the plastic cover), and you will just have to take off the burnt-out license plate bulb and replace it with the new , then check and reassemble the whole thing.
How to replace the rear license plate bulb on my Peugeot 205
Finally last solution, you must replace the bulb on the backplate of your Peugeot 205, but you are not able to open the cover from the outside of your car. In this instance, here is the tactic to perform this task:
- Unplug the battery from your Peugeot 205
- Locate the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, disconnect the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Peugeot 205, test it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have discovered the main tactics for replacing license plate bulbs on your car, take note that on some models the technique may be a bit different but you should be able to do it following the outline of this content page. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Peugeot 205. If you desire to change other bulbs like the position light bulbs on your Peugeot 205 or the low beam bulbs on Peugeot 205, don’t be reluctant to browse our content articles which explain you the procedure to follow.
Whenever you have any further questions about the Peugeot 205, do not hesitate to consult our Peugeot 205 category.
