It doesn’t matter if it’s for your own safety, for roadworthiness tests or to avoid a fine, ensuring your headlamp bulbs are all the time functioning is very important. In reality, bulbs are wearing units that will undoubtedly burn out in the future and as a result need to be changed. You’re probably on this website because one of your parking lights is burnt out and you’re wondering how to change your Peugeot 207’s license plate bulb, we’ve created this content page to help you do it on your own and not have to go to your auto technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Peugeot 207.
How to change the license plate bulb on your Peugeot 207 throughout the outside
This solution is the fastest of the two, in truth, for this one you will simply need to take off the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will spend some time on in the second section of this content page to explain the way.
So let’s start with changing the number plate bulb by going through the outside of your Peugeot 207. It doesn’t matter if it’s the front or the back of your car the method will be identical.
Here are a few simple steps to stick to to execute this maintenance tasks:
- With the engine off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch specified for this purpose (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Peugeot 207
- Use your screwdriver or knife to remove the bulb from its placement, if you are scared of breaking a thing, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and check the light to confirm the successfulness of the task.
.
How to replace the number plate bulb on your Peugeot 207 without outside access
Second section of our article, swap this license plate bulb on your Peugeot 207 without external access. In most cases you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Peugeot 207
To change the one on the front plate, nothing could be much easier, you will have to put yourself under the car (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always held by two soft plastic tabs by pressing on both at once, then now that you have your license plate bulb block in hand, Take away the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to put in too much pressure otherwise you will break the plastic cover), and you will simply have to take off the burnt-out license plate bulb and swap it with the new , then test out and reassemble the whole thing.
How to change the rear license plate bulb on my Peugeot 207
Finally last solution, you must change the bulb on the backplate of your Peugeot 207, but you cannot really open the cover from the outside of your car. In such a case, here is the technique to execute this task:
- Unplug the battery from your Peugeot 207
- Locate the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, unplug the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Peugeot 207, check it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have discovered the main techniques for changing license plate bulbs on your car, bear in mind that on some models the method may be a bit different but you should be able to realize it following the explanation of this article content. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your Peugeot 207. If you want to change other bulbs like the position light bulbs on your Peugeot 207 or the low beam bulbs on Peugeot 207, don’t be reluctant to consult our articles which describe you the process to follow.
To get more tips on the Peugeot 207, take a look at the Peugeot 207 category.
