It doesn’t matter if it’s for your own safety, for roadworthiness tests or to avoid a fine, being certain your headlamp bulbs are always operational is extremely important. Indeed, bulbs are wearing parts that will inevitably burn out over time and therefore need to be swapped out. You’re most likely on this site because one of your parking lights is burnt out and you’re wanting to know how to change your Nissan Xterra’s license plate bulb, we’ve created this article content to help you do it all on your own and not have to go to your technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Nissan Xterra.
How to swap the license plate bulb on your Nissan Xterra coming from the outside
This tactic is the fastest of the two, in fact, for this one you will just require to take off the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will spend a moment on in the second part of this content to show you the way.
So let’s start with changing the number plate bulb by going through the outside of your Nissan Xterra. It doesn’t matter if it’s the front or the back of your vehicle the procedure will be identical.
Here are a few simple guidelines to stick to to carry out this maintenance:
- With the engine off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch provided for this goal (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Nissan Xterra
- Use your screwdriver or knife to remove the bulb from its place, in the event that you are afraid of destroying something, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to confirm the success of the procedure.
.
How to replace the number plate bulb on your Nissan Xterra without outside access
Second part of our document, swap this license plate bulb on your Nissan Xterra without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Nissan Xterra
To swap the one on the front plate, nothing could be less complicated, you will have to put yourself under the vehicle (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always held by two soft plastic tabs by pressing on both at once, then now that you have your license plate bulb block in hand, Take away the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to put in too much pressure or you will break the plastic cover), and you will only have to take off the burnt-out license plate bulb and replace it with the new , then test out and reassemble the whole thing.
How to swap the rear license plate bulb on my Nissan Xterra
Finally last solution, you must swap the bulb on the backplate of your Nissan Xterra, but you are not able to open the cover from the outside of your vehicle. In such a case, here is the technique to perform this operation:
- Unplug the battery from your Nissan Xterra
- Find the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, disconnect the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Nissan Xterra, test it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have found out the main techniques for changing license plate bulbs on your car, take notice that on some models the method may be a bit different but you should be able to do it following the explanation of this content. If you can’t do it, don’t hesitate to go to your workshop it would be a shame to break a part of your Nissan Xterra. If you want to change other bulbs like the position light bulbs on your Nissan Xterra or the low beam bulbs on Nissan Xterra, don’t hesitate to browse our articles which demonstrate you the operation to follow.
In the event that you have any further questions about the Nissan Xterra, do not hesitate to consult our Nissan Xterra category.
