Regardless it’s for your own personal safety, for roadworthiness testing or to avoid a fine, ensuring your headlamp bulbs are always functioning is fundamental. In fact, bulbs are wearing parts that will predictably burn out with time and as a consequence need to be swapped out. You’re most certainly on this website because one of your parking lights is burnt out and you’re wondering how to change your Nissan X-trail’s license plate bulb, we’ve written this article to help you do it by yourself and not have to go to your auto technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Nissan X-trail.


How to swap the license plate bulb on your Nissan X-trail throughout the outside

This method is the simplest of the two, actually, for this one you will simply need to remove the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will dedicate some time on in the second section of this content to demonstrate the way.
So let’s begin with swapping the number plate bulb by going through the outside of your Nissan X-trail. Regardless it’s the front or the back of your vehicle the method will be identical.
Here are a few simple guidelines to follow to execute this service:

  • With the engine turned off, unplug the battery terminals from your car
  • Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch supplied for this intent (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Nissan X-trail
  • .

  • Use your screwdriver or knife to eject the bulb from its place, in the event that you are scared of destroying something, you can as well do it with your fingers.
  • Finally, put the new license plate light bulb
  • Last step, before reassembling, reconnect your battery and verify the light to confirm the success of the operation.

How to change the number plate bulb on your Nissan X-trail without outside access

Second section of our document, change this license plate bulb on your Nissan X-trail without external access. Generally you will be able to access it, however some series (often at the rear does not allow this access).

How to swap the front license plate bulb on my Nissan X-trail

To swap the one on the front plate, nothing could be much easier, you will have to put yourself under the vehicle (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually kept by two soft plastic tabs by pressing on both at the same time, then now that you have your license plate bulb block in hand, Take off the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to exert too much pressure otherwise you will break the plastic cover), and you will only have to remove the burnt-out license plate bulb and swap it with the new , then check and reassemble the whole thing.

How to swap the rear license plate bulb on my Nissan X-trail

Finally last option, you must swap the bulb on the backplate of your Nissan X-trail, but you cannot open the cover from the outside of your vehicle. In this instance, here is the method to accomplish this operation:

  • Disconnect the battery from your Nissan X-trail
  • Find the location of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever softly on all the frame of the trunk to remove it.
  • Once located, before removing the bulb holders, unplug the holders for easier access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Change the burnt-out license plate bulb on your Nissan X-trail, verify it and reassemble it, watching the clips on the trunk liner

There you have it, you have found out the main techniques for swapping license plate bulbs on your car, take note that on some models the methodology may be a bit different but you should be able to do it following the outline of this content. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Nissan X-trail. If you desire to change other bulbs like the position light bulbs on your Nissan X-trail or the low beam bulbs on Nissan X-trail, don’t be reluctant to read our articles which demonstrate you the procedure to follow.

In the event that you have any further questions about the Nissan X-trail, do not hesitate to consult our Nissan X-trail category.