It doesn’t matter if it’s for your personal safety, for roadworthiness testing or to avoid a fine, ensuring your headlamp bulbs are constantly working is extremely important. In reality, bulbs are wearing auto parts that will undoubtedly burn out with time and as a result need to be replaced. You’re probably here because one of your parking lights is burnt out and you’re wanting to know how to change your Nissan Titan’s license plate bulb, we’ve written and published this article content to help you do it on your own and not have to go to your motor mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Nissan Titan.
How to change the license plate bulb on your Nissan Titan coming from the outside
This solution is the most simple of the two, actually, for this one you will just require to remove the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the situation we will take some time on in the second section of this article to explain the approach.
So let’s begin with swapping the number plate bulb by going through the outside of your Nissan Titan. It doesn’t matter if it’s the front or the back of your car the procedure will be similar.
Here are a few simple steps to follow to conduct this routine service:
- With the engine off, disconnect the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch assigned for this goal (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Nissan Titan
- Use your screwdriver or knife to remove the bulb from its location, in the event that you are afraid of destroying a thing, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and test the light to confirm the success of the procedure.
.
How to change the number plate bulb on your Nissan Titan without outside access
Second section of our item, replace this license plate bulb on your Nissan Titan without external access. Most often you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Nissan Titan
To change the one on the front plate, nothing could be much easier, you will have to position yourself under the car (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally kept by two soft plastic tabs by pressing on both simultaneously, then right after you have your license plate bulb block in hand, Take out the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be careful not to apply too much force otherwise you will break the plastic cover), and you will only have to remove the burnt-out license plate bulb and change it with the new , then check and reassemble the whole thing.
How to change the rear license plate bulb on my Nissan Titan
Finally last solution, you must change the bulb on the backplate of your Nissan Titan, but you simply cannot open the cover from the outside of your car. In this case, here is the solution to perform this task:
- Disconnect the battery from your Nissan Titan
- Find the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, disconnect the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Nissan Titan, test it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have discovered the main ways for swapping license plate bulbs on your car, take note that on some models the technique may be a bit different but you should be able to realize it following the explanation of this article. If you can’t do it, don’t be reluctant to go to your garage it would be a shame to break a part of your Nissan Titan. If you desire to change other bulbs like the position light bulbs on your Nissan Titan or the low beam bulbs on Nissan Titan, don’t be reluctant to consult our content articles which describe you the procedure to follow.
If you have any further questions about the Nissan Titan, do not hesitate to consult our Nissan Titan category.
