Regardless it’s for your specific safety, for roadworthiness tests or to avoid a fine, being certain your headlamp bulbs are constantly effective is very important. In reality, bulbs are wearing auto parts that will undoubtedly burn out in the future and as a result need to be changed. You’re perhaps on this site because one of your parking lights is burnt out and you’re wanting to know how to change your Nissan Sentra’s license plate bulb, we’ve written this document to help you do it all on your own and not have to go to your technician. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Nissan Sentra.
How to swap the license plate bulb on your Nissan Sentra coming from the outside
This approach is the fastest of the two, actually, for this one you will only need to take away the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will spend a moment on in the second part of this article to explain the way.
So let’s start with changing the number plate bulb by going through the outside of your Nissan Sentra. Regardless it’s the front or the back of your car the technique will be similar.
Here are a few simple guidelines to follow to carry out this maintenance:
- With the engine turned off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch supplied for this purpose (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Nissan Sentra
- Use your screwdriver or knife to remove the bulb from its placement, in the event that you are scared of destroying something, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and check the light to confirm the achievement of the process.
.
How to replace the number plate bulb on your Nissan Sentra without outside access
Second part of our item, replace this license plate bulb on your Nissan Sentra without external access. Most often you will be able to access it, but some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Nissan Sentra
To swap the one on the front plate, nothing could be less complicated, you will have to put yourself under the car (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases held by two soft plastic tabs by pressing on both simultaneously, then once you have your license plate bulb block in hand, Take off the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be careful not to put in too much pressure otherwise you will break the plastic cover), and you will just have to take away the burnt-out license plate bulb and swap it with the new , then check and reassemble the whole thing.
How to swap the rear license plate bulb on my Nissan Sentra
Finally last option, you must swap the bulb on the backplate of your Nissan Sentra, but you cannot really open the cover from the outside of your car. In this instance, here is the solution to conduct this task:
- Unplug the battery from your Nissan Sentra
- Identify the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Nissan Sentra, check it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have learned the main tactics for changing license plate bulbs on your car, remember that on some models the technique may be a bit different but you should be able to accomplish it following the explanation of this article content. If you can’t do it, don’t be reluctant to go to your workshop it would be a shame to break a part of your Nissan Sentra. If you want to change other bulbs like the position light bulbs on your Nissan Sentra or the low beam bulbs on Nissan Sentra, don’t be reluctant to read our articles which demonstrate you the process to follow.
If you wish more guides on the Nissan Sentra, go to our Nissan Sentra category.
