Regardless whether it’s for your own personal safety, for roadworthiness tests or to avoid a fine, ensuring your headlamp bulbs are always functional is necessary. In reality, bulbs are wearing auto parts that will undoubtedly burn out after some time and as a consequence need to be swapped out. You’re most likely on the website because one of your parking lights is burnt out and you’re wanting to know how to change your Nissan Micra 5’s license plate bulb, we’ve written this document to help you do it on your own and not have to go to your auto mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Nissan Micra 5.
How to change the license plate bulb on your Nissan Micra 5 coming from the outside
This solution is the simplest of the two, actually, for this one you will just have to remove the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will take a moment on in the second part of this document to teach you the method.
So let’s begin with swapping the number plate bulb by going through the outside of your Nissan Micra 5. Regardless whether it’s the front or the back of your vehicle the procedure will be similar.
Here are a few simple actions to stick to to carry out this routine service:
- With the engine turned off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch provided for this purpose (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Nissan Micra 5
- Use your screwdriver or knife to eject the bulb from its spot, if you are afraid of breaking a thing, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and verify the light to confirm the successfulness of the operation.
.
How to change the number plate bulb on your Nissan Micra 5 without outside access
Second part of our content page, replace this license plate bulb on your Nissan Micra 5 without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Nissan Micra 5
To change the one on the front plate, nothing could be simpler, you will have to position yourself under the vehicle (ideally placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually held by two soft plastic tabs by pressing on both at the same time, then right after you have your license plate bulb block in hand, Take away the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to exert too much pressure or you will break the plastic cover), and you will just have to remove the burnt-out license plate bulb and swap it with the new , then test and reassemble the whole thing.
How to change the rear license plate bulb on my Nissan Micra 5
Finally last option, you must change the bulb on the backplate of your Nissan Micra 5, but you cannot really open the cover from the outside of your vehicle. In this instance, here is the technique to execute this task:
- Disconnect the battery from your Nissan Micra 5
- Locate the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, disconnect the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Nissan Micra 5, verify it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have discovered the main solutions for swapping license plate bulbs on your car, bear in mind that on some models the methodology may be a bit different but you should be able to realize it following the explanation of this article. If you can’t do it, don’t hesitate to go to your mechanic it would be a shame to break a part of your Nissan Micra 5. If you need to change other bulbs like the position light bulbs on your Nissan Micra 5 or the low beam bulbs on Nissan Micra 5, don’t hesitate to browse our content articles which demonstrate you the procedure to follow.
If you need more tutorials on the Nissan Micra 5, go to our Nissan Micra 5 category.
