It doesn’t matter if it’s for your personal safety, for roadworthiness tests or to avoid a fine, making sure your headlamp bulbs are constantly effective is really important. In reality, bulbs are wearing parts that will obviously burn out after some time and therefore need to be swapped out. You’re probably on this website because one of your parking lights is burnt out and you’re worried about how to change your Mercedes Classe E 4’s license plate bulb, we’ve created this content page to help you do it on your own and not have to go to your technician. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Mercedes Classe E 4.
How to replace the license plate bulb on your Mercedes Classe E 4 through the outside
This technique is the quickest of the two, actually, for this one you will only require to take out the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will spend a moment on in the second section of this content page to describe the approach.
So let’s begin with changing the number plate bulb by going through the outside of your Mercedes Classe E 4. It doesn’t matter if it’s the front or the back of your car the process will be similar.
Here are a few simple actions to stick to to execute this service:
- With the engine off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch provided for this intent (commonly on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Mercedes Classe E 4
- Use your screwdriver or knife to remove the bulb from its spot, in the event that you are worried of damaging a thing, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and test the light to confirm the successfulness of the operation.
.
How to change the number plate bulb on your Mercedes Classe E 4 without outside access
Second section of our content page, swap this license plate bulb on your Mercedes Classe E 4 without external access. Generally you will be able to access it, but some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Mercedes Classe E 4
To replace the one on the front plate, nothing could be less difficult, you will have to position yourself under the car (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, commonly kept by two soft plastic tabs by pressing on both at once, then once you have your license plate bulb block in hand, Take off the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to apply too much pressure or you will break the plastic cover), and you will just have to take out the burnt-out license plate bulb and replace it with the new , then check and reassemble the whole thing.
How to replace the rear license plate bulb on my Mercedes Classe E 4
Finally last option, you must replace the bulb on the backplate of your Mercedes Classe E 4, but you simply cannot open the cover from the outside of your car. In this instance, here is the technique to conduct this task:
- Unplug the battery from your Mercedes Classe E 4
- Locate the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Mercedes Classe E 4, test it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have learned the main solutions for changing license plate bulbs on your car, bear in mind that on some models the method may be a bit different but you should be able to accomplish it following the explanation of this article. If you can’t do it, don’t hesitate to go to your workshop it would be a shame to break a part of your Mercedes Classe E 4. If you desire to change other bulbs like the position light bulbs on your Mercedes Classe E 4 or the low beam bulbs on Mercedes Classe E 4, don’t hesitate to browse our articles which describe you the procedure to follow.
To get more tips on the Mercedes Classe E 4, take a look at the Mercedes Classe E 4 category.
