Whether it’s for your own personal security, for roadworthiness tests or to avoid a fine, being certain your headlamp bulbs are always effective is extremely important. Indeed, bulbs are wearing parts that will surely burn out in the future and therefore need to be swapped out. You’re most likely on the website because one of your parking lights is burnt out and you’re wondering how to change your Nissan Leaf’s license plate bulb, we’ve written this content to help you do it all on your own and not have to go to your auto mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Nissan Leaf.

change-license-plate-bulb-nissan-leaf

How to change the license plate bulb on your Nissan Leaf through the outside

This method is the fastest of the two, in reality, for this one you will just require to take away the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will take a moment on in the second section of this document to demonstrate the method.
So let’s begin with changing the number plate bulb by going through the outside of your Nissan Leaf. Whether it’s the front or the back of your car the method will be the same.
Here are a few simple guidelines to follow to perform this maintenance:

  • With the engine off, disconnect the battery terminals from your car
  • Face your license plate and use a flat screwdriver or knife to place the flat part into the notch supplied for this intent (commonly on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Nissan Leaf
  • .

  • Use your screwdriver or knife to remove the bulb from its location, in the event you are worried of destroying anything, you can also do it with your fingers.
  • Finally, put the new license plate light bulb
  • Last stage, before reassembling, reconnect your battery and verify the light to confirm the successfulness of the operation.

How to replace the number plate bulb on your Nissan Leaf without outside access

Second section of our article, replace this license plate bulb on your Nissan Leaf without external access. Generally you will be able to access it, but some series (often at the rear does not allow this access).

How to change the front license plate bulb on my Nissan Leaf

To change the one on the front plate, nothing could be simpler, you will have to put yourself under the car (preferably put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, commonly held by two soft plastic tabs by pressing on both at the same time, then now that you have your license plate bulb block in hand, Take off the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to put in too much force otherwise you will break the plastic cover), and you will simply have to take away the burnt-out license plate bulb and swap it with the new , then test and reassemble the whole thing.

How to change the rear license plate bulb on my Nissan Leaf

Finally last possibility, you must change the bulb on the backplate of your Nissan Leaf, but you cannot really open the cover from the outside of your car. In such a case, here is the approach to operate this operation:

  • Disconnect the battery from your Nissan Leaf
  • Identify the location of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever delicately on all the frame of the trunk to remove it.
  • Once established, before removing the bulb holders, disconnect the holders for easier access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Replace the burnt-out license plate bulb on your Nissan Leaf, verify it and reassemble it, paying attention to the clips on the trunk liner

.
There you have it, you have learned the main tactics for changing license plate bulbs on your car, be aware that on some models the technique may be a bit different but you should be able to do it following the explanation of this content page. If you can’t do it, don’t be reluctant to go to your garage it would be a shame to break a part of your Nissan Leaf. If you desire to change other bulbs like the position light bulbs on your Nissan Leaf or the low beam bulbs on Nissan Leaf, don’t be reluctant to browse our articles which explain you the process to follow.

In the event that you have any additional questions about the Nissan Leaf, do not hesitate to consult our Nissan Leaf category.