Whether it’s for your own personal safety, for roadworthiness tests or to avoid a fine, making sure your headlamp bulbs are all the time working is very important. In fact, bulbs are wearing auto parts that will surely burn out in the future and as a result need to be swapped out. You’re probably in this article because one of your parking lights is burnt out and you’re struggling with how to change your Nissan Cube’s license plate bulb, we’ve made this content to help you do it on your own and not have to go to your motor mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Nissan Cube.
How to change the license plate bulb on your Nissan Cube coming from the outside
This process is the quickest of the two, in fact, for this one you will only need to take out the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will dedicate a moment on in the second part of this article content to show you the method.
So let’s begin with swapping the number plate bulb by going through the outside of your Nissan Cube. Whether it’s the front or the back of your car the operation will be the same.
Here are a few simple steps to follow to carry out this maintenance:
- With the engine off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch assigned for this goal (in general on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Nissan Cube
- Use your screwdriver or knife to eject the bulb from its spot, in the event that you are afraid of destroying anything, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and check the light to validate the success of the task.
.
How to replace the number plate bulb on your Nissan Cube without outside access
Second part of our content, change this license plate bulb on your Nissan Cube without external access. In most cases you will be able to access it, however some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Nissan Cube
To change the one on the front plate, nothing could be less complicated, you will have to position yourself under the car (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in general held by two soft plastic tabs by pressing on both at the same time, then now that you have your license plate bulb block in hand, Take off the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to exert too much pressure otherwise you will break the plastic cover), and you will simply have to take out the burnt-out license plate bulb and swap it with the new , then test and reassemble the whole thing.
How to change the rear license plate bulb on my Nissan Cube
Finally last option, you must change the bulb on the backplate of your Nissan Cube, but you cannot really open the cover from the outside of your car. In this instance, here is the method to conduct this operation:
- Unplug the battery from your Nissan Cube
- Identify the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Nissan Cube, check it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have found out the main methods for swapping license plate bulbs on your car, bear in mind that on some models the method may be a bit different but you should be able to realize it following the explanation of this content. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Nissan Cube. If you desire to change other bulbs like the position light bulbs on your Nissan Cube or the low beam bulbs on Nissan Cube, don’t be reluctant to browse our content articles which explain you the procedure to follow.
To get more tips on the Nissan Cube, take a look at the Nissan Cube category.
