Regardless it’s for your personal security, for roadworthiness testing or to avoid a fine, ensuring your headlamp bulbs are always functional is necessary. In fact, bulbs are wearing units that will inevitably burn out in the future and as a consequence need to be replaced. You’re most likely in this article because one of your parking lights is burnt out and you’re questioning how to change your Mitsubishi Mirage’s license plate bulb, we’ve created this content page to help you do it on your own and not have to go to your auto technician. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Mitsubishi Mirage.
How to swap the license plate bulb on your Mitsubishi Mirage coming from the outside
This process is the simplest of the two, actually, for this one you will just require to remove the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will take a moment on in the second section of this content page to describe the method.
So let’s begin with changing the number plate bulb by going through the outside of your Mitsubishi Mirage. Regardless it’s the front or the back of your vehicle the procedure will be identical.
Here are a few simple actions to stick to to conduct this maintenance:
- With the engine turned off, disconnect the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch assigned for this intent (in general on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Mitsubishi Mirage
- Use your screwdriver or knife to remove the bulb from its spot, if you are afraid of breaking a thing, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to validate the achievement of the operation.
.
How to replace the number plate bulb on your Mitsubishi Mirage without outside access
Second section of our content page, replace this license plate bulb on your Mitsubishi Mirage without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Mitsubishi Mirage
To swap the one on the front plate, nothing could be simpler, you will have to put yourself under the vehicle (preferably put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in general kept by two soft plastic tabs by pressing on both at once, then once you have your license plate bulb block in hand, Take out the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to put in too much force or you will break the plastic cover), and you will just have to remove the burnt-out license plate bulb and replace it with the new , then verify and reassemble the whole thing.
How to swap the rear license plate bulb on my Mitsubishi Mirage
Finally last solution, you must swap the bulb on the backplate of your Mitsubishi Mirage, but you cannot open the cover from the outside of your vehicle. In this instance, here is the approach to execute this operation:
- Unplug the battery from your Mitsubishi Mirage
- Locate the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, disconnect the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Mitsubishi Mirage, verify it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have found out the main approaches for changing license plate bulbs on your car, remember that on some models the method may be a bit different but you should be able to do it following the outline of this document. If you can’t do it, don’t be reluctant to go to your workshop it would be a shame to break a part of your Mitsubishi Mirage. If you need to change other bulbs like the position light bulbs on your Mitsubishi Mirage or the low beam bulbs on Mitsubishi Mirage, don’t be reluctant to browse our content articles which explain you the process to follow.
If perhaps you have any further questions about the Mitsubishi Mirage, do not hesitate to consult our Mitsubishi Mirage category.
