Regardless whether it’s for your specific security, for roadworthiness tests or to avoid a fine, being certain your headlamp bulbs are all the time operational is necessary. In fact, bulbs are wearing units that will predictably burn out over the years and as a result need to be swapped out. You’re quite likely here because one of your parking lights is burnt out and you’re worried about how to change your Mini Countryman’s license plate bulb, we’ve written and published this article content to help you do it without any help and not have to go to your mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Mini Countryman.


How to swap the license plate bulb on your Mini Countryman coming from the outside

This option is the easiest of the two, actually, for this one you will only have to remove the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will spend some time on in the second part of this article content to demonstrate the method.
So let’s start with swapping the number plate bulb by going through the outside of your Mini Countryman. Regardless whether it’s the front or the back of your motor vehicle the technique will be the same.
Here are a few simple actions to stick to to conduct this service:

  • With the engine turned off, unplug the battery terminals from your car
  • Face your license plate and use a flat screwdriver or knife to place the flat part into the notch assigned for this goal (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Mini Countryman
  • .

  • Use your screwdriver or knife to eject the bulb from its location, in the event you are worried of damaging a thing, you can also do it with your fingers.
  • Finally, position the new license plate light bulb
  • Last step, before reassembling, reconnect your battery and test the light to validate the successfulness of the process.

How to change the number plate bulb on your Mini Countryman without outside access

Second part of our content, swap this license plate bulb on your Mini Countryman without external access. Generally you will be able to access it, but some series (often at the rear does not allow this access).

How to swap the front license plate bulb on my Mini Countryman

To swap the one on the front plate, nothing could be less complicated, you will have to position yourself under the motor vehicle (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always kept by two soft plastic tabs by pressing on both at the same time, then right after you have your license plate bulb block in hand, Remove the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to exert too much pressure or you will break the plastic cover), and you will simply have to remove the burnt-out license plate bulb and replace it with the new , then check and reassemble the whole thing.

How to swap the rear license plate bulb on my Mini Countryman

Finally last solution, you must swap the bulb on the backplate of your Mini Countryman, but you are not able to open the cover from the outside of your motor vehicle. In this instance, here is the approach to carry out this task:

  • Unplug the battery from your Mini Countryman
  • Identify the spot of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
  • Once found, before removing the bulb holders, unplug the holders for easier access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Change the burnt-out license plate bulb on your Mini Countryman, test it and reassemble it, paying attention to the clips on the trunk liner

There you have it, you have discovered the main techniques for swapping license plate bulbs on your car, remember that on some models the method may be a bit different but you should be able to realize it following the explanation of this document. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your Mini Countryman. If you desire to change other bulbs like the position light bulbs on your Mini Countryman or the low beam bulbs on Mini Countryman, don’t be reluctant to read our articles which describe you the process to follow.

To find more tips on the Mini Countryman, take a look at the Mini Countryman category.