Regardless it’s for your specific security, for roadworthiness tests or to avoid a fine, being sure your headlamp bulbs are always functional is fundamental. In fact, bulbs are wearing parts that will obviously burn out after some time and as a consequence need to be replaced. You’re perhaps in this article because one of your parking lights is burnt out and you’re questioning how to change your Mercedes Classe Glc’s license plate bulb, we’ve written this document to help you do it all on your own and not have to go to your auto technician. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Mercedes Classe Glc.
How to swap the license plate bulb on your Mercedes Classe Glc throughout the outside
This option is the least difficult of the two, in fact, for this one you will simply require to take away the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will take a moment on in the second part of this article content to clarify the method.
So let’s start with changing the number plate bulb by going through the outside of your Mercedes Classe Glc. Regardless it’s the front or the back of your car the technique will be similar.
Here are a few simple guidelines to follow to execute this maintenance:
- With the engine off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch provided for this intent (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Mercedes Classe Glc
- Use your screwdriver or knife to remove the bulb from its location, in the event that you are worried of destroying something, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and check the light to confirm the achievement of the process.
.
How to replace the number plate bulb on your Mercedes Classe Glc without outside access
Second part of our article, swap this license plate bulb on your Mercedes Classe Glc without external access. Most often you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Mercedes Classe Glc
To swap the one on the front plate, nothing could be easier, you will have to position yourself under the car (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always kept by two soft plastic tabs by pressing on both simultaneously, then right after you have your license plate bulb block in hand, Remove the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to put in too much force otherwise you will break the plastic cover), and you will only have to take away the burnt-out license plate bulb and swap it with the new , then test out and reassemble the whole thing.
How to swap the rear license plate bulb on my Mercedes Classe Glc
Finally last solution, you must swap the bulb on the backplate of your Mercedes Classe Glc, but you cannot open the cover from the outside of your car. In this case, here is the method to carry out this task:
- Unplug the battery from your Mercedes Classe Glc
- Identify the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Mercedes Classe Glc, check it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have discovered the main solutions for changing license plate bulbs on your car, take note that on some models the methodology may be a bit different but you should be able to do it following the outline of this content page. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your Mercedes Classe Glc. If you wish to change other bulbs like the position light bulbs on your Mercedes Classe Glc or the low beam bulbs on Mercedes Classe Glc, don’t be reluctant to consult our articles which explain you the process to follow.
To get more tips on the Mercedes Classe Glc, take a look at the Mercedes Classe Glc category.
