It doesn’t matter if it’s for your personal security, for roadworthiness testing or to avoid a fine, ensuring that your headlamp bulbs are always functional is extremely important. In fact, bulbs are wearing units that will predictably burn out after awhile and as a result need to be replaced. You’re perhaps on this site because one of your parking lights is burnt out and you’re wondering how to change your Mercedes Classe E 5’s license plate bulb, we’ve created this article content to help you do it without any help and not have to go to your auto mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Mercedes Classe E 5.


How to change the license plate bulb on your Mercedes Classe E 5 throughout the outside

This tactic is the simplest of the two, in truth, for this one you will just have to take out the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate some time on in the second part of this article to teach you the way.
So let’s start with replacing the number plate bulb by going through the outside of your Mercedes Classe E 5. It doesn’t matter if it’s the front or the back of your car the operation will be the same.
Here are a few simple actions to stick to to perform this maintenance tasks:

  • With the engine turned off, unplug the battery terminals from your car
  • Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch provided for this purpose (commonly on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Mercedes Classe E 5
  • .

  • Use your screwdriver or knife to remove the bulb from its location, in the event that you are afraid of destroying something, you can as well do it with your fingers.
  • Finally, position the new license plate light bulb
  • Last stage, before reassembling, reconnect your battery and test the light to validate the success of the procedure.

How to replace the number plate bulb on your Mercedes Classe E 5 without outside access

Second part of our content page, replace this license plate bulb on your Mercedes Classe E 5 without external access. In most cases you will be able to access it, nevertheless some series (often at the rear does not allow this access).

How to change the front license plate bulb on my Mercedes Classe E 5

To change the one on the front plate, nothing could be less difficult, you will have to position yourself under the car (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, commonly kept by two soft plastic tabs by pressing on both simultaneously, then once you have your license plate bulb block in hand, Take off the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to put in too much force otherwise you will break the plastic cover), and you will just have to take out the burnt-out license plate bulb and change it with the new , then test and reassemble the whole thing.

How to change the rear license plate bulb on my Mercedes Classe E 5

Finally last possibility, you must change the bulb on the backplate of your Mercedes Classe E 5, but you are not able to open the cover from the outside of your car. In this case, here is the approach to carry out this operation:

  • Unplug the battery from your Mercedes Classe E 5
  • Find the location of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever softly on all the frame of the trunk to remove it.
  • Once established, before removing the bulb holders, unplug the holders for less complicated access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Replace the burnt-out license plate bulb on your Mercedes Classe E 5, test it and reassemble it, watching the clips on the trunk liner

There you have it, you have discovered the main techniques for replacing license plate bulbs on your car, take note that on some models the technique may be a bit different but you should be able to accomplish it following the explanation of this document. If you can’t do it, don’t be reluctant to go to your workshop it would be a shame to break a part of your Mercedes Classe E 5. If you wish to change other bulbs like the position light bulbs on your Mercedes Classe E 5 or the low beam bulbs on Mercedes Classe E 5, don’t be reluctant to browse our content articles which demonstrate you the process to follow.

If you need more tutorials on the Mercedes Classe E 5, go to our Mercedes Classe E 5 category.