Regardless it’s for your personal safety, for roadworthiness testing or to avoid a fine, being certain your headlamp bulbs are all the time effective is really important. In fact, bulbs are wearing units that will predictably burn out after awhile and as a result need to be replaced. You’re most certainly here because one of your parking lights is burnt out and you’re wondering how to change your Mercedes Classe G 3’s license plate bulb, we’ve created this article content to help you do it on your own and not have to go to your mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Mercedes Classe G 3.
How to change the license plate bulb on your Mercedes Classe G 3 through the outside
This option is the most simple of the two, in fact, for this one you will just require to take off the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will spend a moment on in the second section of this content page to teach you the approach.
So let’s start with replacing the number plate bulb by going through the outside of your Mercedes Classe G 3. Regardless it’s the front or the back of your automobile the technique will be the same.
Here are a few simple actions to stick to to carry out this routine service:
- With the engine off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch provided for this goal (in general on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Mercedes Classe G 3
- Use your screwdriver or knife to remove the bulb from its location, in the event you are scared of damaging anything, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to validate the success of the task.
.
How to replace the number plate bulb on your Mercedes Classe G 3 without outside access
Second section of our item, change this license plate bulb on your Mercedes Classe G 3 without external access. Generally you will be able to access it, however some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Mercedes Classe G 3
To change the one on the front plate, nothing could be less complicated, you will have to position yourself under the automobile (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in general kept by two soft plastic tabs by pressing on both at the same time, then once you have your license plate bulb block in hand, Take away the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to apply too much force or you will break the plastic cover), and you will simply have to take off the burnt-out license plate bulb and change it with the new , then check and reassemble the whole thing.
How to change the rear license plate bulb on my Mercedes Classe G 3
Finally last option, you must change the bulb on the backplate of your Mercedes Classe G 3, but you are not able to open the cover from the outside of your automobile. In this case, here is the tactic to operate this operation:
- Unplug the battery from your Mercedes Classe G 3
- Locate the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Mercedes Classe G 3, test it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have found out the main techniques for replacing license plate bulbs on your car, take note that on some models the technique may be a bit different but you should be able to realize it following the outline of this content page. If you can’t do it, don’t hesitate to go to your mechanic it would be a shame to break a part of your Mercedes Classe G 3. If you want to change other bulbs like the position light bulbs on your Mercedes Classe G 3 or the low beam bulbs on Mercedes Classe G 3, don’t hesitate to consult our content articles which describe you the process to follow.
If you wish more guides on the Mercedes Classe G 3, go to our Mercedes Classe G 3 category.
