Regardless whether it’s for your own safety, for roadworthiness testing or to avoid a fine, ensuring your headlamp bulbs are constantly functioning is necessary. Indeed, bulbs are wearing auto parts that will inevitably burn out after a while and as a result need to be swapped out. You’re likely on the website because one of your parking lights is burnt out and you’re wondering how to change your Kia Picanto 3’s license plate bulb, we’ve created this document to help you do it by yourself and not have to go to your mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Kia Picanto 3.
How to swap the license plate bulb on your Kia Picanto 3 coming from the outside
This approach is the least difficult of the two, in fact, for this one you will only require to remove the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate a moment on in the second part of this content to explain the way.
So let’s begin with replacing the number plate bulb by going through the outside of your Kia Picanto 3. Regardless whether it’s the front or the back of your automobile the method will be the same.
Here are a few simple guidelines to stick to to conduct this service:
- With the engine off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch supplied for this intent (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Kia Picanto 3
- Use your screwdriver or knife to remove the bulb from its spot, if you are worried of destroying a thing, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and verify the light to confirm the success of the procedure.
.
How to change the number plate bulb on your Kia Picanto 3 without outside access
Second part of our item, change this license plate bulb on your Kia Picanto 3 without external access. In most cases you will be able to access it, but some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Kia Picanto 3
To swap the one on the front plate, nothing could be less difficult, you will have to position yourself under the automobile (ideally placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally held by two soft plastic tabs by pressing on both simultaneously, then once you have your license plate bulb block in hand, Take away the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to exert too much pressure or you will break the plastic cover), and you will just have to remove the burnt-out license plate bulb and change it with the new , then check and reassemble the whole thing.
How to swap the rear license plate bulb on my Kia Picanto 3
Finally last option, you must swap the bulb on the backplate of your Kia Picanto 3, but you cannot really open the cover from the outside of your automobile. In this case, here is the technique to perform this task:
- Unplug the battery from your Kia Picanto 3
- Find the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, unplug the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Kia Picanto 3, verify it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have learned the main methods for replacing license plate bulbs on your car, bear in mind that on some models the technique may be a bit different but you should be able to do it following the explanation of this document. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Kia Picanto 3. If you want to change other bulbs like the position light bulbs on your Kia Picanto 3 or the low beam bulbs on Kia Picanto 3, don’t be reluctant to read our articles which demonstrate you the operation to follow.
To discover more tips on the Kia Picanto 3, take a look at the Kia Picanto 3 category.
