It doesn’t matter if it’s for your specific safety, for roadworthiness testing or to avoid a fine, ensuring your headlamp bulbs are in every case effective is very important. In reality, bulbs are wearing units that will surely burn out with time and as a consequence need to be replaced. You’re most certainly in this article because one of your parking lights is burnt out and you’re struggling with how to change your Mercedes Classe A 4’s license plate bulb, we’ve written this content to help you do it all on your own and not have to go to your mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Mercedes Classe A 4.
How to replace the license plate bulb on your Mercedes Classe A 4 through the outside
This tactic is the most simple of the two, in truth, for this one you will simply need to remove the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will dedicate some time on in the second section of this document to describe the approach.
So let’s start with replacing the number plate bulb by going through the outside of your Mercedes Classe A 4. It doesn’t matter if it’s the front or the back of your motor vehicle the technique will be identical.
Here are a few simple guidelines to follow to conduct this routine service:
- With the engine off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch supplied for this goal (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Mercedes Classe A 4
- Use your screwdriver or knife to remove the bulb from its location, in the event that you are worried of breaking something, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to confirm the successfulness of the task.
.
How to replace the number plate bulb on your Mercedes Classe A 4 without outside access
Second section of our content page, replace this license plate bulb on your Mercedes Classe A 4 without external access. Most often you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Mercedes Classe A 4
To replace the one on the front plate, nothing could be less difficult, you will have to position yourself under the motor vehicle (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases held by two soft plastic tabs by pressing on both at once, then once you have your license plate bulb block in hand, Take out the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to put in too much force otherwise you will break the plastic cover), and you will simply have to remove the burnt-out license plate bulb and replace it with the new , then test and reassemble the whole thing.
How to replace the rear license plate bulb on my Mercedes Classe A 4
Finally last option, you must replace the bulb on the backplate of your Mercedes Classe A 4, but you cannot open the cover from the outside of your motor vehicle. In this instance, here is the technique to accomplish this operation:
- Disconnect the battery from your Mercedes Classe A 4
- Locate the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Mercedes Classe A 4, verify it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have discovered the main techniques for replacing license plate bulbs on your car, be aware that on some models the method may be a bit different but you should be able to accomplish it following the outline of this article. If you can’t do it, don’t be reluctant to go to your garage it would be a shame to break a part of your Mercedes Classe A 4. If you want to change other bulbs like the position light bulbs on your Mercedes Classe A 4 or the low beam bulbs on Mercedes Classe A 4, don’t be reluctant to browse our articles which describe you the procedure to follow.
If you have any additional questions about the Mercedes Classe A 4, do not hesitate to consult our Mercedes Classe A 4 category.
