Regardless it’s for your specific safety, for roadworthiness tests or to avoid a fine, making sure your headlamp bulbs are all the time working is fundamental. In reality, bulbs are wearing auto parts that will predictably burn out in the future and consequently need to be swapped out. You’re perhaps on the website because one of your parking lights is burnt out and you’re questioning how to change your Maserati Ghibli’s license plate bulb, we’ve written this content page to help you do it all on your own and not have to go to your auto mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Maserati Ghibli.

change-license-plate-bulb-maserati-ghibli

How to replace the license plate bulb on your Maserati Ghibli through the outside

This tactic is the easiest of the two, in truth, for this one you will just have to take off the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate a moment on in the second part of this article content to clarify the method.
So let’s begin with changing the number plate bulb by going through the outside of your Maserati Ghibli. Regardless it’s the front or the back of your car the procedure will be similar.
Here are a few simple actions to stick to to conduct this service:

  • With the engine turned off, unplug the battery terminals from your car
  • Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch supplied for this intent (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Maserati Ghibli
  • .

  • Use your screwdriver or knife to eject the bulb from its placement, if you are worried of destroying anything, you can also do it with your fingers.
  • Finally, put the new license plate light bulb
  • Last stage, before reassembling, reconnect your battery and check the light to validate the success of the process.

How to change the number plate bulb on your Maserati Ghibli without outside access

Second part of our article, swap this license plate bulb on your Maserati Ghibli without external access. Generally you will be able to access it, but some series (often at the rear does not allow this access).

How to replace the front license plate bulb on my Maserati Ghibli

To replace the one on the front plate, nothing could be easier, you will have to put yourself under the car (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases held by two soft plastic tabs by pressing on both simultaneously, then once you have your license plate bulb block in hand, Take away the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to put in too much pressure or you will break the plastic cover), and you will just have to take off the burnt-out license plate bulb and replace it with the new , then check and reassemble the whole thing.

How to replace the rear license plate bulb on my Maserati Ghibli

Finally last option, you must replace the bulb on the backplate of your Maserati Ghibli, but you cannot open the cover from the outside of your car. In this case, here is the tactic to accomplish this task:

  • Disconnect the battery from your Maserati Ghibli
  • Locate the spot of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever carefully on all the frame of the trunk to remove it.
  • Once established, before removing the bulb holders, unplug the holders for much easier access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Change the burnt-out license plate bulb on your Maserati Ghibli, check it and reassemble it, watching the clips on the trunk liner

.
There you have it, you have learned the main techniques for changing license plate bulbs on your car, take note that on some models the methodology may be a bit different but you should be able to do it following the explanation of this article content. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Maserati Ghibli. If you need to change other bulbs like the position light bulbs on your Maserati Ghibli or the low beam bulbs on Maserati Ghibli, don’t be reluctant to browse our articles which explain you the process to follow.

If you wish more guides on the Maserati Ghibli, go to our Maserati Ghibli category.