Regardless whether it’s for your own security, for roadworthiness tests or to avoid a fine, being certain your headlamp bulbs are all the time effective is necessary. In reality, bulbs are wearing units that will obviously burn out after awhile and therefore need to be replaced. You’re likely on the website because one of your parking lights is burnt out and you’re worried about how to change your Lincoln MKS’s license plate bulb, we’ve created this article to help you do it by yourself and not have to go to your auto technician. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Lincoln MKS.
How to swap the license plate bulb on your Lincoln MKS through the outside
This option is the simplest of the two, actually, for this one you will only require to take out the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will take a moment on in the second part of this article content to teach you the approach.
So let’s begin with replacing the number plate bulb by going through the outside of your Lincoln MKS. Regardless whether it’s the front or the back of your automobile the operation will be the same.
Here are a few simple actions to stick to to perform this maintenance tasks:
- With the engine off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch specified for this intent (commonly on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Lincoln MKS
- Use your screwdriver or knife to eject the bulb from its spot, in the event you are afraid of damaging anything, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to validate the achievement of the operation.
.
How to change the number plate bulb on your Lincoln MKS without outside access
Second part of our item, replace this license plate bulb on your Lincoln MKS without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Lincoln MKS
To swap the one on the front plate, nothing could be easier, you will have to position yourself under the automobile (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, commonly kept by two soft plastic tabs by pressing on both at the same time, then once you have your license plate bulb block in hand, Remove the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to apply too much pressure otherwise you will break the plastic cover), and you will just have to take out the burnt-out license plate bulb and swap it with the new , then test out and reassemble the whole thing.
How to swap the rear license plate bulb on my Lincoln MKS
Finally last solution, you must swap the bulb on the backplate of your Lincoln MKS, but you simply cannot open the cover from the outside of your automobile. In this instance, here is the solution to operate this task:
- Disconnect the battery from your Lincoln MKS
- Locate the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, disconnect the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Lincoln MKS, verify it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have discovered the main approaches for replacing license plate bulbs on your car, take notice that on some models the methodology may be a bit different but you should be able to do it following the outline of this document. If you can’t do it, don’t hesitate to go to your garage it would be a shame to break a part of your Lincoln MKS. If you need to change other bulbs like the position light bulbs on your Lincoln MKS or the low beam bulbs on Lincoln MKS, don’t hesitate to read our content articles which demonstrate you the operation to follow.
To discover more tips on the Lincoln MKS, take a look at the Lincoln MKS category.
