Do you have the perception of a power drop without any logical explanation, and all this occurs in an unforeseen or usual way? Maybe it’s because your Kia Picanto 3 is going to limp mode . In truth, the security mode can be activated on a motor vehicle for a number of causes and the activation of this mode will set the engine’s performance, occasionally causing a momentary or irrevocable loss of power from your Kia Picanto 3 until you handle the issue. Our publishers wanted to compose this guide so that you can handle this concern, which is very embarrassing and can be dangerous for you and the rest of the drivers. In order to address these problems, we will focus on the limp mode of your Kia Picanto 3. And secondly, what are the causes why your Kia Picanto 3 goes into security mode?


Kia Picanto 3 THAT GOES TO limp mode: WHAT IS IT?

Let’s start our article with the definition of your Kia Picanto 3 that goes to limp mode . You likely won’t have any info about the fact that this mode has been turned on and you will just feel the results. In most cases the clues of a safety mode on your Kia Picanto 3 will be that you will notice an identifiable loss of power, you should not be able to exceed 3000 rpm which makes the use of your Kia Picanto 3 more than complicated. Furthermore to the power loss, you may have an amber warning light on your speedometer which will appear on the dash to advise that you go to your mechanic to deal with the issue as fairly quickly as possible. In reality, via your vehicle’s ECU and the various sensors that continuously monitor the operation of your engine, your Kia Picanto 3 that goes to safety is in reality a kind of electronic flange of your engine. However, you must be worried about this fairly quickly because it likely hides a concern that needs to be dealt with, nevertheless, especially over time, certain elements such as the EGR valve, the catalytic converter or the particle filter will become clogged and will age much more fairly quickly. In some scenarios, simply turning your Kia Picanto 3 off and on again will be enough to turn off the security mode, in other cases the original concern must be fixed to return to regular behaviour.

Why is my Kia Picanto 3 going into limp mode?

Now we’re going to outline the causes why your Kia Picanto 3 is on limp mode. To begin with you can easily check if this is the case by using your diagnostic plug and Kia Picanto 3reading the fault codes of your Kia Picanto 3. Please have a look at our specific guideline which teaches you how to use these tools and interpret the fault codes of your Kia Picanto 3 yourself. You should find out a fault code displayed caused by an engine component. Based on the finish of your motor vehicle the on-board computer will also tell you that you are in security mode. We will then discover most of the parts that can produce your Kia Picanto 3 safe.

  • Turbo: A faulty turbo will automatically notify your computer and produce your motor vehicle safe.
  • The EGR valve: If your car is ever used in a really quiet way or just for short trips at low speed, it will occasionally clog up and trigger the security mode to be activated.
  • The Particle Filter: A component famous for the complications it triggers, in the event that your PAP is clogged, you will be subject to a safety shutdown of your Kia Picanto 3 just because your engine will not be able to effectively exhaust the exhaust gases.
  • The flow meter: Finally, the flow meter is the last of the established causes of an Kia Picanto 3 going into security. In fact, if it doesn’t control the air/fuel mixture effectively, your ECU will know the problem instantly.

In case you have any other worries or questions about your motor vehicle, you can certainly discover the solution in our Kia Picanto 3 Guide.

If you want more guides on the Kia Picanto 3, go to our Kia Picanto 3 category.