Regardless it’s for your own personal safety, for roadworthiness tests or to avoid a fine, ensuring your headlamp bulbs are in every case effective is fundamental. Indeed, bulbs are wearing parts that will obviously burn out after awhile and as a consequence need to be replaced. You’re quite likely on this site because one of your parking lights is burnt out and you’re struggling with how to change your Infiniti QX80’s license plate bulb, we’ve created this article to help you do it on your own and not have to go to your auto technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Infiniti QX80.
How to replace the license plate bulb on your Infiniti QX80 through the outside
This tactic is the simplest of the two, in truth, for this one you will simply need to take off the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will take some time on in the second section of this article to show you the way.
So let’s start with swapping the number plate bulb by going through the outside of your Infiniti QX80. Regardless it’s the front or the back of your motor vehicle the technique will be the same.
Here are a few simple guidelines to stick to to carry out this maintenance:
- With the engine turned off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch assigned for this purpose (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Infiniti QX80
- Use your screwdriver or knife to eject the bulb from its location, if you are afraid of damaging anything, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to confirm the success of the procedure.
.
How to change the number plate bulb on your Infiniti QX80 without outside access
Second section of our document, swap this license plate bulb on your Infiniti QX80 without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Infiniti QX80
To replace the one on the front plate, nothing could be much easier, you will have to put yourself under the motor vehicle (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually held by two soft plastic tabs by pressing on both simultaneously, then once you have your license plate bulb block in hand, Take away the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to put in too much pressure or you will break the plastic cover), and you will only have to take off the burnt-out license plate bulb and replace it with the new , then test and reassemble the whole thing.
How to replace the rear license plate bulb on my Infiniti QX80
Finally last solution, you must replace the bulb on the backplate of your Infiniti QX80, but you simply cannot open the cover from the outside of your motor vehicle. In such a case, here is the method to accomplish this operation:
- Unplug the battery from your Infiniti QX80
- Identify the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, disconnect the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Infiniti QX80, verify it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have found out the main approaches for swapping license plate bulbs on your car, take note that on some models the method may be a bit different but you should be able to do it following the outline of this article. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your Infiniti QX80. If you wish to change other bulbs like the position light bulbs on your Infiniti QX80 or the low beam bulbs on Infiniti QX80, don’t be reluctant to consult our content articles which demonstrate you the process to follow.
If perhaps you have any further questions about the Infiniti QX80, do not hesitate to consult our Infiniti QX80 category.
