Regardless whether it’s for your own personal security, for roadworthiness testing or to avoid a fine, being certain your headlamp bulbs are in every case functioning is really important. In reality, bulbs are wearing units that will predictably burn out as time passes and consequently need to be changed. You’re perhaps here because one of your parking lights is burnt out and you’re wanting to know how to change your Hyundai Tucson’s license plate bulb, we’ve written and published this content page to help you do it without any help and not have to go to your mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Hyundai Tucson.
How to swap the license plate bulb on your Hyundai Tucson throughout the outside
This technique is the fastest of the two, in reality, for this one you will just require to take away the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will spend a moment on in the second section of this article content to demonstrate the approach.
So let’s begin with replacing the number plate bulb by going through the outside of your Hyundai Tucson. Regardless whether it’s the front or the back of your automobile the procedure will be similar.
Here are a few simple guidelines to follow to conduct this maintenance:
- With the engine off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch assigned for this goal (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Hyundai Tucson
- Use your screwdriver or knife to remove the bulb from its spot, if you are worried of destroying something, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to confirm the success of the process.
.
How to replace the number plate bulb on your Hyundai Tucson without outside access
Second section of our document, swap this license plate bulb on your Hyundai Tucson without external access. Most often you will be able to access it, but some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Hyundai Tucson
To swap the one on the front plate, nothing could be easier, you will have to position yourself under the automobile (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally held by two soft plastic tabs by pressing on both at once, then now that you have your license plate bulb block in hand, Take out the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to apply too much pressure otherwise you will break the plastic cover), and you will simply have to take away the burnt-out license plate bulb and swap it with the new , then test and reassemble the whole thing.
How to swap the rear license plate bulb on my Hyundai Tucson
Finally last option, you must swap the bulb on the backplate of your Hyundai Tucson, but you are not able to open the cover from the outside of your automobile. In this case, here is the approach to accomplish this task:
- Unplug the battery from your Hyundai Tucson
- Locate the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Hyundai Tucson, verify it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have found out the main ways for replacing license plate bulbs on your car, remember that on some models the method may be a bit different but you should be able to realize it following the explanation of this article. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Hyundai Tucson. If you desire to change other bulbs like the position light bulbs on your Hyundai Tucson or the low beam bulbs on Hyundai Tucson, don’t be reluctant to consult our content articles which demonstrate you the operation to follow.
If you wish more tutorials on the Hyundai Tucson, go to our Hyundai Tucson category.
