Whether it’s for your personal safety, for roadworthiness testing or to avoid a fine, ensuring your headlamp bulbs are constantly working is fundamental. Indeed, bulbs are wearing units that will predictably burn out over time and consequently need to be replaced. You’re quite likely on this site because one of your parking lights is burnt out and you’re wondering how to change your GMC Acadia’s license plate bulb, we’ve created this article content to help you do it by yourself and not have to go to your auto technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your GMC Acadia.
How to swap the license plate bulb on your GMC Acadia through the outside
This approach is the most simple of the two, in truth, for this one you will simply have to take away the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate some time on in the second section of this content page to describe the way.
So let’s begin with swapping the number plate bulb by going through the outside of your GMC Acadia. Whether it’s the front or the back of your car the operation will be similar.
Here are a few simple steps to follow to carry out this routine service:
- With the engine turned off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch supplied for this intent (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your GMC Acadia
- Use your screwdriver or knife to remove the bulb from its location, in the event you are worried of breaking anything, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to confirm the successfulness of the procedure.
.
How to change the number plate bulb on your GMC Acadia without outside access
Second section of our document, change this license plate bulb on your GMC Acadia without external access. Most often you will be able to access it, but some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my GMC Acadia
To swap the one on the front plate, nothing could be much easier, you will have to put yourself under the car (ideally placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually kept by two soft plastic tabs by pressing on both simultaneously, then once you have your license plate bulb block in hand, Remove the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to exert too much force otherwise you will break the plastic cover), and you will just have to take away the burnt-out license plate bulb and swap it with the new , then test and reassemble the whole thing.
How to swap the rear license plate bulb on my GMC Acadia
Finally last option, you must swap the bulb on the backplate of your GMC Acadia, but you simply cannot open the cover from the outside of your car. In such a case, here is the approach to do this operation:
- Unplug the battery from your GMC Acadia
- Identify the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your GMC Acadia, verify it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have found out the main approaches for swapping license plate bulbs on your car, be aware that on some models the methodology may be a bit different but you should be able to realize it following the explanation of this content. If you can’t do it, don’t hesitate to go to your garage area it would be a shame to break a part of your GMC Acadia. If you desire to change other bulbs like the position light bulbs on your GMC Acadia or the low beam bulbs on GMC Acadia, don’t hesitate to read our content articles which explain you the process to follow.
Whenever you have any further questions about the GMC Acadia, do not hesitate to consult our GMC Acadia category.
