Regardless whether it’s for your own safety, for roadworthiness testing or to avoid a fine, being certain your headlamp bulbs are in every case functional is necessary. Indeed, bulbs are wearing units that will surely burn out with time and as a consequence need to be replaced. You’re probably on this website because one of your parking lights is burnt out and you’re wanting to know how to change your Ford Taurus’s license plate bulb, we’ve written this content to help you do it on your own and not have to go to your technician. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Ford Taurus.
How to replace the license plate bulb on your Ford Taurus through the outside
This option is the least difficult of the two, actually, for this one you will simply need to remove the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will spend a moment on in the second part of this article content to describe the way.
So let’s start with swapping the number plate bulb by going through the outside of your Ford Taurus. Regardless whether it’s the front or the back of your car the process will be similar.
Here are a few simple actions to follow to execute this routine service:
- With the engine off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch specified for this purpose (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Ford Taurus
- Use your screwdriver or knife to remove the bulb from its place, in the event you are scared of damaging anything, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to confirm the success of the procedure.
.
How to replace the number plate bulb on your Ford Taurus without outside access
Second part of our article, change this license plate bulb on your Ford Taurus without external access. Most often you will be able to access it, but some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Ford Taurus
To replace the one on the front plate, nothing could be much easier, you will have to put yourself under the car (preferably put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always held by two soft plastic tabs by pressing on both at once, then now that you have your license plate bulb block in hand, Remove the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to put in too much pressure otherwise you will break the plastic cover), and you will only have to remove the burnt-out license plate bulb and replace it with the new , then check and reassemble the whole thing.
How to replace the rear license plate bulb on my Ford Taurus
Finally last possibility, you must replace the bulb on the backplate of your Ford Taurus, but you cannot open the cover from the outside of your car. In this case, here is the method to do this task:
- Unplug the battery from your Ford Taurus
- Locate the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, unplug the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Ford Taurus, verify it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have discovered the main techniques for swapping license plate bulbs on your car, be aware that on some models the technique may be a bit different but you should be able to accomplish it following the explanation of this article content. If you can’t do it, don’t hesitate to go to your garage it would be a shame to break a part of your Ford Taurus. If you desire to change other bulbs like the position light bulbs on your Ford Taurus or the low beam bulbs on Ford Taurus, don’t hesitate to browse our articles which explain you the operation to follow.
If you need more tutorials on the Ford Taurus, go to our Ford Taurus category.
