Regardless it’s for your own personal security, for roadworthiness testing or to avoid a fine, ensuring your headlamp bulbs are constantly functional is really important. In reality, bulbs are wearing auto parts that will undoubtedly burn out over the years and as a result need to be swapped out. You’re most certainly on this website because one of your parking lights is burnt out and you’re struggling with how to change your Ford Focus’s license plate bulb, we’ve created this article content to help you do it by yourself and not have to go to your motor mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Ford Focus.
How to replace the license plate bulb on your Ford Focus throughout the outside
This method is the easiest of the two, actually, for this one you will just require to take out the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the situation we will take a moment on in the second part of this content page to demonstrate the method.
So let’s start with replacing the number plate bulb by going through the outside of your Ford Focus. Regardless it’s the front or the back of your car the procedure will be identical.
Here are a few simple actions to follow to conduct this maintenance tasks:
- With the engine off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch specified for this intent (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Ford Focus
- Use your screwdriver or knife to eject the bulb from its location, if you are scared of destroying anything, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to confirm the achievement of the process.
.
How to replace the number plate bulb on your Ford Focus without outside access
Second part of our item, swap this license plate bulb on your Ford Focus without external access. In most cases you will be able to access it, but some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Ford Focus
To replace the one on the front plate, nothing could be less complicated, you will have to put yourself under the car (ideally placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually held by two soft plastic tabs by pressing on both at the same time, then once you have your license plate bulb block in hand, Take out the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to apply too much pressure otherwise you will break the plastic cover), and you will only have to take out the burnt-out license plate bulb and swap it with the new , then test and reassemble the whole thing.
How to replace the rear license plate bulb on my Ford Focus
Finally last option, you must replace the bulb on the backplate of your Ford Focus, but you cannot open the cover from the outside of your car. In this instance, here is the process to do this operation:
- Unplug the battery from your Ford Focus
- Find the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Ford Focus, test it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have found out the main methods for replacing license plate bulbs on your car, take note that on some models the method may be a bit different but you should be able to realize it following the explanation of this content. If you can’t do it, don’t be reluctant to go to your workshop it would be a shame to break a part of your Ford Focus. If you need to change other bulbs like the position light bulbs on your Ford Focus or the low beam bulbs on Ford Focus, don’t be reluctant to read our articles which describe you the procedure to follow.
To get more tips on the Ford Focus, take a look at the Ford Focus category.
