Regardless whether it’s for your specific security, for roadworthiness tests or to avoid a fine, ensuring your headlamp bulbs are all the time working is really important. In reality, bulbs are wearing parts that will predictably burn out over time and as a result need to be swapped out. You’re probably on this website because one of your parking lights is burnt out and you’re wanting to know how to change your Dodge Durango’s license plate bulb, we’ve written and published this content to help you do it without any help and not have to go to your auto mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Dodge Durango.
How to replace the license plate bulb on your Dodge Durango through the outside
This process is the easiest of the two, actually, for this one you will only need to take away the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate a moment on in the second section of this article to describe the method.
So let’s begin with swapping the number plate bulb by going through the outside of your Dodge Durango. Regardless whether it’s the front or the back of your automobile the method will be the same.
Here are a few simple steps to stick to to conduct this maintenance:
- With the engine turned off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch supplied for this purpose (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Dodge Durango
- Use your screwdriver or knife to eject the bulb from its place, in the event you are afraid of breaking anything, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to validate the achievement of the process.
.
How to replace the number plate bulb on your Dodge Durango without outside access
Second section of our article, replace this license plate bulb on your Dodge Durango without external access. Generally you will be able to access it, but some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Dodge Durango
To replace the one on the front plate, nothing could be much easier, you will have to put yourself under the automobile (ideally placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases kept by two soft plastic tabs by pressing on both simultaneously, then now that you have your license plate bulb block in hand, Take out the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to exert too much force or you will break the plastic cover), and you will just have to take away the burnt-out license plate bulb and change it with the new , then verify and reassemble the whole thing.
How to replace the rear license plate bulb on my Dodge Durango
Finally last solution, you must replace the bulb on the backplate of your Dodge Durango, but you cannot really open the cover from the outside of your automobile. In this case, here is the method to conduct this task:
- Unplug the battery from your Dodge Durango
- Identify the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, disconnect the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Dodge Durango, test it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have discovered the main ways for swapping license plate bulbs on your car, be aware that on some models the methodology may be a bit different but you should be able to realize it following the outline of this article content. If you can’t do it, don’t be reluctant to go to your garage it would be a shame to break a part of your Dodge Durango. If you need to change other bulbs like the position light bulbs on your Dodge Durango or the low beam bulbs on Dodge Durango, don’t be reluctant to browse our articles which explain you the operation to follow.
To find more tips on the Dodge Durango, take a look at the Dodge Durango category.
