Regardless whether it’s for your own personal safety, for roadworthiness tests or to avoid a fine, being sure your headlamp bulbs are constantly functioning is fundamental. In fact, bulbs are wearing parts that will undoubtedly burn out after a while and therefore need to be changed. You’re probably here because one of your parking lights is burnt out and you’re questioning how to change your Dodge Charger’s license plate bulb, we’ve written and published this document to help you do it by yourself and not have to go to your technician. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Dodge Charger.
How to change the license plate bulb on your Dodge Charger through the outside
This process is the simplest of the two, in truth, for this one you will just have to take off the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will take some time on in the second part of this article content to explain the method.
So let’s start with changing the number plate bulb by going through the outside of your Dodge Charger. Regardless whether it’s the front or the back of your vehicle the procedure will be identical.
Here are a few simple actions to follow to conduct this maintenance tasks:
- With the engine off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch supplied for this purpose (in general on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Dodge Charger
- Use your screwdriver or knife to eject the bulb from its placement, in the event that you are scared of breaking anything, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and check the light to confirm the successfulness of the operation.
.
How to replace the number plate bulb on your Dodge Charger without outside access
Second part of our document, change this license plate bulb on your Dodge Charger without external access. Generally you will be able to access it, however some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Dodge Charger
To change the one on the front plate, nothing could be less complicated, you will have to position yourself under the vehicle (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in general held by two soft plastic tabs by pressing on both simultaneously, then now that you have your license plate bulb block in hand, Take out the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be careful not to apply too much force or you will break the plastic cover), and you will only have to take off the burnt-out license plate bulb and replace it with the new , then test out and reassemble the whole thing.
How to change the rear license plate bulb on my Dodge Charger
Finally last possibility, you must change the bulb on the backplate of your Dodge Charger, but you cannot open the cover from the outside of your vehicle. In such a case, here is the tactic to execute this operation:
- Unplug the battery from your Dodge Charger
- Identify the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Dodge Charger, check it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have learned the main ways for changing license plate bulbs on your car, take note that on some models the methodology may be a bit different but you should be able to accomplish it following the outline of this article. If you can’t do it, don’t be reluctant to go to your garage it would be a shame to break a part of your Dodge Charger. If you need to change other bulbs like the position light bulbs on your Dodge Charger or the low beam bulbs on Dodge Charger, don’t be reluctant to consult our content articles which demonstrate you the procedure to follow.
Whenever you have any additional questions about the Dodge Charger, do not hesitate to consult our Dodge Charger category.
