Whether it’s for your own personal safety, for roadworthiness tests or to avoid a fine, being sure your headlamp bulbs are all the time effective is really important. In fact, bulbs are wearing units that will obviously burn out over time and consequently need to be changed. You’re likely in this article because one of your parking lights is burnt out and you’re wondering how to change your Citroen Berlingo’s license plate bulb, we’ve created this article to help you do it without any help and not have to go to your auto technician. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Citroen Berlingo.
How to change the license plate bulb on your Citroen Berlingo coming from the outside
This technique is the easiest of the two, in fact, for this one you will simply need to remove the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will take some time on in the second part of this article to clarify the method.
So let’s start with replacing the number plate bulb by going through the outside of your Citroen Berlingo. Whether it’s the front or the back of your motor vehicle the method will be identical.
Here are a few simple actions to follow to conduct this maintenance:
- With the engine turned off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch provided for this purpose (commonly on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Citroen Berlingo
- Use your screwdriver or knife to eject the bulb from its location, in the event that you are worried of destroying something, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and test the light to validate the achievement of the task.
.
How to change the number plate bulb on your Citroen Berlingo without outside access
Second part of our item, swap this license plate bulb on your Citroen Berlingo without external access. In most cases you will be able to access it, but some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Citroen Berlingo
To change the one on the front plate, nothing could be less hard, you will have to position yourself under the motor vehicle (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, commonly held by two soft plastic tabs by pressing on both at the same time, then once you have your license plate bulb block in hand, Take out the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to exert too much force otherwise you will break the plastic cover), and you will only have to remove the burnt-out license plate bulb and replace it with the new , then test out and reassemble the whole thing.
How to change the rear license plate bulb on my Citroen Berlingo
Finally last possibility, you must change the bulb on the backplate of your Citroen Berlingo, but you cannot really open the cover from the outside of your motor vehicle. In such a case, here is the technique to do this task:
- Unplug the battery from your Citroen Berlingo
- Identify the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, disconnect the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Citroen Berlingo, test it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have found out the main solutions for replacing license plate bulbs on your car, bear in mind that on some models the methodology may be a bit different but you should be able to accomplish it following the explanation of this content. If you can’t do it, don’t hesitate to go to your garage area it would be a shame to break a part of your Citroen Berlingo. If you need to change other bulbs like the position light bulbs on your Citroen Berlingo or the low beam bulbs on Citroen Berlingo, don’t hesitate to browse our content articles which demonstrate you the process to follow.
If you wish more guides on the Citroen Berlingo, go to our Citroen Berlingo category.
