Regardless it’s for your personal security, for roadworthiness tests or to avoid a fine, ensuring that your headlamp bulbs are in every case effective is fundamental. In reality, bulbs are wearing auto parts that will obviously burn out after some time and as a result need to be swapped out. You’re almost certainly on this site because one of your parking lights is burnt out and you’re worried about how to change your Citroen C3 Picasso’s license plate bulb, we’ve created this document to help you do it all on your own and not have to go to your technician. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Citroen C3 Picasso.

change-license-plate-bulb-citroen-c3-picasso

How to swap the license plate bulb on your Citroen C3 Picasso throughout the outside

This method is the fastest of the two, actually, for this one you will just have to take away the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the situation we will take some time on in the second part of this article to clarify the approach.
So let’s start with replacing the number plate bulb by going through the outside of your Citroen C3 Picasso. Regardless it’s the front or the back of your automobile the procedure will be the same.
Here are a few simple guidelines to stick to to perform this routine service:

  • With the engine off, disconnect the battery terminals from your car
  • Face your license plate and use a flat screwdriver or knife to place the flat part into the notch assigned for this goal (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Citroen C3 Picasso
  • .

  • Use your screwdriver or knife to remove the bulb from its place, if you are scared of destroying anything, you can also do it with your fingers.
  • Finally, position the new license plate light bulb
  • Last stage, before reassembling, reconnect your battery and test the light to confirm the successfulness of the procedure.

How to replace the number plate bulb on your Citroen C3 Picasso without outside access

Second part of our item, replace this license plate bulb on your Citroen C3 Picasso without external access. Most often you will be able to access it, but some series (often at the rear does not allow this access).

How to swap the front license plate bulb on my Citroen C3 Picasso

To swap the one on the front plate, nothing could be less hard, you will have to position yourself under the automobile (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases kept by two soft plastic tabs by pressing on both at once, then right after you have your license plate bulb block in hand, Remove the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be careful not to apply too much force otherwise you will break the plastic cover), and you will just have to take away the burnt-out license plate bulb and replace it with the new , then verify and reassemble the whole thing.

How to swap the rear license plate bulb on my Citroen C3 Picasso

Finally last possibility, you must swap the bulb on the backplate of your Citroen C3 Picasso, but you are not able to open the cover from the outside of your automobile. In this case, here is the approach to carry out this operation:

  • Disconnect the battery from your Citroen C3 Picasso
  • Find the spot of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
  • Once established, before removing the bulb holders, disconnect the holders for easier access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Replace the burnt-out license plate bulb on your Citroen C3 Picasso, test it and reassemble it, watching the clips on the trunk liner

.
There you have it, you have discovered the main tactics for replacing license plate bulbs on your car, take note that on some models the method may be a bit different but you should be able to do it following the outline of this content. If you can’t do it, don’t hesitate to go to your workshop it would be a shame to break a part of your Citroen C3 Picasso. If you desire to change other bulbs like the position light bulbs on your Citroen C3 Picasso or the low beam bulbs on Citroen C3 Picasso, don’t hesitate to read our content articles which explain you the operation to follow.

To get more tips on the Citroen C3 Picasso, take a look at the Citroen C3 Picasso category.