Regardless whether it’s for your personal security, for roadworthiness tests or to avoid a fine, ensuring your headlamp bulbs are constantly effective is necessary. In reality, bulbs are wearing parts that will undoubtedly burn out after awhile and consequently need to be replaced. You’re almost certainly on this site because one of your parking lights is burnt out and you’re worried about how to change your Chevrolet Sonic’s license plate bulb, we’ve written this content page to help you do it all on your own and not have to go to your technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Chevrolet Sonic.
How to replace the license plate bulb on your Chevrolet Sonic throughout the outside
This tactic is the simplest of the two, in fact, for this one you will just have to take off the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will take some time on in the second part of this article content to demonstrate the method.
So let’s begin with changing the number plate bulb by going through the outside of your Chevrolet Sonic. Regardless whether it’s the front or the back of your motor vehicle the process will be identical.
Here are a few simple actions to stick to to execute this maintenance tasks:
- With the engine off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch assigned for this intent (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Chevrolet Sonic
- Use your screwdriver or knife to remove the bulb from its location, in the event you are scared of destroying a thing, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and test the light to confirm the success of the procedure.
.
How to replace the number plate bulb on your Chevrolet Sonic without outside access
Second part of our content, change this license plate bulb on your Chevrolet Sonic without external access. In most cases you will be able to access it, but some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Chevrolet Sonic
To replace the one on the front plate, nothing could be less difficult, you will have to put yourself under the motor vehicle (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases held by two soft plastic tabs by pressing on both simultaneously, then right after you have your license plate bulb block in hand, Remove the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to exert too much force otherwise you will break the plastic cover), and you will simply have to take off the burnt-out license plate bulb and replace it with the new , then check and reassemble the whole thing.
How to replace the rear license plate bulb on my Chevrolet Sonic
Finally last possibility, you must replace the bulb on the backplate of your Chevrolet Sonic, but you cannot really open the cover from the outside of your motor vehicle. In such a case, here is the process to do this operation:
- Unplug the battery from your Chevrolet Sonic
- Locate the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, disconnect the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Chevrolet Sonic, test it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have found out the main techniques for changing license plate bulbs on your car, take note that on some models the technique may be a bit different but you should be able to accomplish it following the outline of this content. If you can’t do it, don’t hesitate to go to your mechanic it would be a shame to break a part of your Chevrolet Sonic. If you wish to change other bulbs like the position light bulbs on your Chevrolet Sonic or the low beam bulbs on Chevrolet Sonic, don’t hesitate to browse our content articles which describe you the operation to follow.
To find more tips on the Chevrolet Sonic, take a look at the Chevrolet Sonic category.
