Regardless it’s for your own safety, for roadworthiness tests or to avoid a fine, making sure your headlamp bulbs are constantly working is really important. Indeed, bulbs are wearing units that will surely burn out over the years and therefore need to be swapped out. You’re most certainly in this article because one of your parking lights is burnt out and you’re questioning how to change your BMW X1’s license plate bulb, we’ve written and published this content to help you do it all on your own and not have to go to your auto technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your BMW X1.
How to replace the license plate bulb on your BMW X1 through the outside
This technique is the fastest of the two, in truth, for this one you will simply need to take out the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will take a moment on in the second part of this article content to show you the method.
So let’s start with swapping the number plate bulb by going through the outside of your BMW X1. Regardless it’s the front or the back of your vehicle the operation will be identical.
Here are a few simple steps to follow to execute this routine service:
- With the engine turned off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch specified for this intent (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your BMW X1
- Use your screwdriver or knife to eject the bulb from its spot, in the event you are worried of damaging anything, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and check the light to validate the successfulness of the operation.
.
How to replace the number plate bulb on your BMW X1 without outside access
Second part of our document, change this license plate bulb on your BMW X1 without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my BMW X1
To replace the one on the front plate, nothing could be much easier, you will have to put yourself under the vehicle (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always held by two soft plastic tabs by pressing on both at the same time, then once you have your license plate bulb block in hand, Remove the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to apply too much force otherwise you will break the plastic cover), and you will just have to take out the burnt-out license plate bulb and swap it with the new , then test and reassemble the whole thing.
How to replace the rear license plate bulb on my BMW X1
Finally last solution, you must replace the bulb on the backplate of your BMW X1, but you are not able to open the cover from the outside of your vehicle. In such a case, here is the process to accomplish this operation:
- Unplug the battery from your BMW X1
- Identify the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, disconnect the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your BMW X1, check it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have discovered the main methods for swapping license plate bulbs on your car, remember that on some models the method may be a bit different but you should be able to do it following the outline of this article content. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your BMW X1. If you wish to change other bulbs like the position light bulbs on your BMW X1 or the low beam bulbs on BMW X1, don’t be reluctant to consult our content articles which demonstrate you the procedure to follow.
In the event that you have any additional questions about the BMW X1, do not hesitate to consult our BMW X1 category.
