Whether it’s for your personal security, for roadworthiness testing or to avoid a fine, ensuring that your headlamp bulbs are constantly functional is very important. In fact, bulbs are wearing auto parts that will undoubtedly burn out after a while and as a result need to be changed. You’re likely on the website because one of your parking lights is burnt out and you’re questioning how to change your Mercedes Benz CLA Class’s license plate bulb, we’ve written and published this content to help you do it all on your own and not have to go to your auto technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Mercedes Benz CLA Class.
How to change the license plate bulb on your Mercedes Benz CLA Class coming from the outside
This solution is the most simple of the two, actually, for this one you will only have to remove the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate some time on in the second section of this document to describe the method.
So let’s begin with changing the number plate bulb by going through the outside of your Mercedes Benz CLA Class. Whether it’s the front or the back of your car the process will be identical.
Here are a few simple guidelines to stick to to perform this service:
- With the engine turned off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch provided for this goal (commonly on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Mercedes Benz CLA Class
- Use your screwdriver or knife to remove the bulb from its place, if you are worried of destroying anything, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to validate the success of the task.
.
How to replace the number plate bulb on your Mercedes Benz CLA Class without outside access
Second section of our content page, replace this license plate bulb on your Mercedes Benz CLA Class without external access. Generally you will be able to access it, but some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Mercedes Benz CLA Class
To change the one on the front plate, nothing could be much easier, you will have to position yourself under the car (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, commonly kept by two soft plastic tabs by pressing on both simultaneously, then once you have your license plate bulb block in hand, Take away the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to apply too much pressure or you will break the plastic cover), and you will only have to remove the burnt-out license plate bulb and change it with the new , then verify and reassemble the whole thing.
How to change the rear license plate bulb on my Mercedes Benz CLA Class
Finally last solution, you must change the bulb on the backplate of your Mercedes Benz CLA Class, but you cannot open the cover from the outside of your car. In this instance, here is the technique to execute this operation:
- Unplug the battery from your Mercedes Benz CLA Class
- Identify the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Mercedes Benz CLA Class, verify it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have found out the main techniques for changing license plate bulbs on your car, take notice that on some models the technique may be a bit different but you should be able to do it following the outline of this document. If you can’t do it, don’t hesitate to go to your garage area it would be a shame to break a part of your Mercedes Benz CLA Class. If you want to change other bulbs like the position light bulbs on your Mercedes Benz CLA Class or the low beam bulbs on Mercedes Benz CLA Class, don’t hesitate to consult our articles which explain you the operation to follow.
In the event that you have any additional questions about the Mercedes Benz CLA Class, do not hesitate to consult our Mercedes Benz CLA Class category.
