Regardless whether it’s for your own personal security, for roadworthiness tests or to avoid a fine, being sure your headlamp bulbs are constantly working is very important. In reality, bulbs are wearing parts that will obviously burn out as time passes and as a result need to be replaced. You’re probably on this website because one of your parking lights is burnt out and you’re wondering how to change your Bmw Serie 1 F21’s license plate bulb, we’ve written and published this content page to help you do it by yourself and not have to go to your motor mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Bmw Serie 1 F21.
How to change the license plate bulb on your Bmw Serie 1 F21 coming from the outside
This technique is the least difficult of the two, in fact, for this one you will only need to remove the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will spend a moment on in the second section of this article to demonstrate the way.
So let’s start with replacing the number plate bulb by going through the outside of your Bmw Serie 1 F21. Regardless whether it’s the front or the back of your automobile the operation will be the same.
Here are a few simple actions to stick to to carry out this routine service:
- With the engine off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch assigned for this goal (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Bmw Serie 1 F21
- Use your screwdriver or knife to eject the bulb from its place, in the event you are afraid of breaking anything, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to confirm the success of the operation.
.
How to replace the number plate bulb on your Bmw Serie 1 F21 without outside access
Second section of our content, replace this license plate bulb on your Bmw Serie 1 F21 without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Bmw Serie 1 F21
To change the one on the front plate, nothing could be simpler, you will have to position yourself under the automobile (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always held by two soft plastic tabs by pressing on both at the same time, then right after you have your license plate bulb block in hand, Take off the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to put in too much force otherwise you will break the plastic cover), and you will just have to remove the burnt-out license plate bulb and change it with the new , then check and reassemble the whole thing.
How to change the rear license plate bulb on my Bmw Serie 1 F21
Finally last solution, you must change the bulb on the backplate of your Bmw Serie 1 F21, but you cannot really open the cover from the outside of your automobile. In such a case, here is the method to carry out this task:
- Disconnect the battery from your Bmw Serie 1 F21
- Locate the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Bmw Serie 1 F21, verify it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have found out the main tactics for replacing license plate bulbs on your car, take notice that on some models the method may be a bit different but you should be able to do it following the explanation of this content. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your Bmw Serie 1 F21. If you desire to change other bulbs like the position light bulbs on your Bmw Serie 1 F21 or the low beam bulbs on Bmw Serie 1 F21, don’t be reluctant to read our content articles which explain you the operation to follow.
If you have any further questions about the Bmw Serie 1 F21, do not hesitate to consult our Bmw Serie 1 F21 category.
