It doesn’t matter if it’s for your specific security, for roadworthiness testing or to avoid a fine, ensuring that your headlamp bulbs are all the time effective is really important. In fact, bulbs are wearing auto parts that will surely burn out after a while and consequently need to be swapped out. You’re almost certainly in this article because one of your parking lights is burnt out and you’re questioning how to change your BMW i3’s license plate bulb, we’ve made this article content to help you do it without any help and not have to go to your mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your BMW i3.
How to swap the license plate bulb on your BMW i3 coming from the outside
This method is the easiest of the two, in reality, for this one you will just require to take out the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will take some time on in the second section of this content to teach you the method.
So let’s start with swapping the number plate bulb by going through the outside of your BMW i3. It doesn’t matter if it’s the front or the back of your automobile the procedure will be identical.
Here are a few simple steps to follow to execute this maintenance tasks:
- With the engine turned off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch specified for this purpose (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your BMW i3
- Use your screwdriver or knife to eject the bulb from its location, in the event that you are afraid of breaking something, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and check the light to validate the achievement of the process.
.
How to replace the number plate bulb on your BMW i3 without outside access
Second section of our content page, replace this license plate bulb on your BMW i3 without external access. Most often you will be able to access it, but some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my BMW i3
To swap the one on the front plate, nothing could be less complicated, you will have to position yourself under the automobile (preferably put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always held by two soft plastic tabs by pressing on both at the same time, then once you have your license plate bulb block in hand, Take off the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to exert too much force or you will break the plastic cover), and you will just have to take out the burnt-out license plate bulb and replace it with the new , then test and reassemble the whole thing.
How to swap the rear license plate bulb on my BMW i3
Finally last solution, you must swap the bulb on the backplate of your BMW i3, but you are not able to open the cover from the outside of your automobile. In this case, here is the solution to execute this operation:
- Unplug the battery from your BMW i3
- Find the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, disconnect the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your BMW i3, check it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have found out the main approaches for swapping license plate bulbs on your car, bear in mind that on some models the technique may be a bit different but you should be able to realize it following the outline of this document. If you can’t do it, don’t be reluctant to go to your garage it would be a shame to break a part of your BMW i3. If you desire to change other bulbs like the position light bulbs on your BMW i3 or the low beam bulbs on BMW i3, don’t be reluctant to read our articles which explain you the operation to follow.
If perhaps you have any additional questions about the BMW i3, do not hesitate to consult our BMW i3 category.
